Which wires for Origin Live tonearm?

@frogman ... Thanks for the cable review. Is the AN cable you tested the AN-AI? Did you order it from audionote.co.uk or elsewhere? Its description says that there are three wires twisted together. So I presume that one wire is used for the - terminal of both channels on the cartridge, while the other two wires are used for the +L and +R terminals. Is this understanding correct?

I am am interested in rewiring a tonearm. Hope you don’t mind my asking for clarification and guidance. Thanks again.

Nothing wrong with Discovery cable, it's great, reasonably priced for such a short piece of thin 4 wires, more flexible than cardas. Easy to work with soldering. My Lustre GST-801 was rewired with Discovery cable, i also use the rest for headshells. I think the total price was about $40 or so.  

van den Hul MCS 150M is the best silver wire from my own experience. 

mre28m5, each run of wire is composed of three twisted strands.  One would need four runs of the wire; two for each channel (+/-). The wire came from audionote u.k. via their North America distributor (at the time?) Audio Federation.  

chakster is correct, there is nothing wrong with Discovery cable; in fact I 
liked it quite a bit.  For my tastes, WITH AN AIRBEARING TONEARM, it just did not have the same level of purity of tone that the AN had.  The AN is not perfect either.  I can see how in a system that leans to the thin and lean the Discovery might be preferred for its fuller presentation; grain and all.  

invictus, which other silver cable have you compared the VDH to?

The person writing about AN wire fails to specify which AN wire he refers to, but I assume it is their silver Litz wire, because THAT, my friends, IS a pain in the arse to work with.  But it is very very good sounding.  And I am one who generally regards AN products as mostly hyped.  I also agree that every single Benz product I have heard is strangely in the same sonic family, a little dark sounding.  The analogy that 100W bulbs have been changed for 40W bulbs is apt.