How much should a person spend to get a decent power conditioner?

For grins last eve I decided to test ( double blind of course - hard to see out of both eyes after a few Reds ) the theory and well accepted claim that the power amp should not be plugged into the conditioner...

yup

front end into an Isotek, amp into a Furman PF15i

not as good as amp MC240 ( heavily modified by Mike Samra ) direct to wall

test CD - David Gilmour Solo
test wine : DAVIS Family Vineyards, Healdsburg CA

your voltage may vary

Just to make sure....
repeating test
with:

Crooked Still - Shaken by a Low Sound.....

folkfreak: curious to know why you say balanced power is more trouble than it is worth. I have 4 systems all using EquiTech balanced power and have had no trouble at all. ET lowers noise floor 16dB on average so it allows you to really hear the music. I liken it to the clarity you get when listening to music in your car and you turn the engine off. Lower the noise floor and all of a sudden you can really hear the music. I started a thread a while back with a novice power conditioner question and got a variety of interesting responses. Decided to opt for balanced power and glad I did. Unfortunately good power conditioners are not inexpensive. I’d like to try an AudioQuest Niagara 7000 for $7999 :) But the 1000 for $999 might be a better choice on a budget.

I have had several PS Audio units. They are well built and have had a positive impact on the sound as long as i did not try to run a amp thought them. The last one a P10 i still have, but no longer use. I now use High Fidelity MC 6 Hemisphere half the price and a much richer and detailed sound than what i got with the P10. The Hemisphere is for front end equipment only ( no amps). I gave up surge and spike protection, but the sound was much better with the Hemisphere.
Good luck
Pete

Has anybody else compared late model PS audio regenerators with High Fidelity conditioners?

@leotis my concerns with balanced power are based on my experience with a 350lb EquiTech in wall unit installed by the premier studio power technician in the LA area. It was continually popping GFCIs from interference with other household appliances (I actually had to rewire it to bypass the GFCIs in the end), I had to be careful on incompatibility with some of my existing equipment such as the Sound Applications conditioner, and finally the House was unsellable without it removed as the buyer could not deal with non standard outlets. So if you are considering an in wall application bear this in mind. None of these issues affect my current in wall Torus which is balanced in, single ended out which is in my mind the best compromise