@bifwynne ......... Warranty states in owners manual that it is limited to the original purchaser . And a photo copy of the dated purchase receipt. I do not think if you buy a unit second hand they will honor the limited warranty.
Problem with brand new black ARC Ref 6
I thought i would write telling you about my experience when i purchased my brand new black ARC Ref 6 preamp about a month ago. It was working fine for a few days and then when i went to press the tube hours on the remote to display on the preamp the unit would cut off, or go to a different auxiliary. It would not happen all the time but often enough to know something was not right. I contacted ARC personally about this and Evan from ARC said it could be the remote. He said to bring it to my ARC dealer that i had bought it from and try his remote from his Ref 6. Same results as before. I was very disappointed as this did not solve the problem. I called Evan again and told him it still was malfunctioning. He said he never ever heard of this problem before and asked me if i wanted a new preamp and said he was so sorry about that. Since it was being returned i asked him if i could get the natural silver instead of the black he said no problem . Within about a week or so my new ARC Ref came to my dealer and all is fine with this one. I just want to say that dealing with ARC they are awesome and second to none with dealing with a problem. They take care of their customers with the very best and professionalism one could ever ask for from a company. Could not be happier !!!! Also i am in NJ and my ARC dealer is Audio Connection in Verona... John is the owner and he is an awesome guy in the business.Knows his components inside and out... I have been dealing with them since 1990 when i first bought my Counterpoint SA 220 amp and SA 2000 preamp. He is and was always there for me with any questions or concerns or problems. Truly old school. Thank you Evan from ARC and John from Audio Connection !!!!!!!!!
- ...
- 27 posts total
@tattooedtrackman: "Warranty states in owners manual that it is limited to the original purchaser . And a photo copy of the dated purchase receipt. I do not think if you buy a unit second hand they will honor the limited warranty." I am sure you are correct, but I bought my demo unit from an authorized ARC dealer. Per ARC, I step into his shoes and take the balance of the dealer's warranty. In my case, ... about 10 months. Hopefully, I will never need it. Have read some other threads where one or two folks had a problem. I surmise that after 2+ years and 610 hours, if there was a bug, it would have presented itself by now. As to your other point re the unitary pass-thru, ... please forgive me if I do not test what you just wrote. lol BIF |
Re unitary gain -- ideally you should operate your pre amp as close to unitary gain (1:1) as possible i.e. avoiding active amplification and avoiding excessive use of the volume control. To the extent you can manage gain upstream of the amp you'll find it better if you do this then if you send in too small a signal (and have to up the volume into the 6-12dB of available gain) or if you have to run the volume control at <30 on the 110 point setting. In my experience the range 40-60 (or 70) sounds best. ps this will also obviate any risk in excessive gain in switching between sources, or inadvertently activating the pass through |
@folkfreak, I recall that my Ref CD-8 output is 4 volts. That is way too much voltage for my amp. Unitary would be terrible. So here, the Ref 6 would attenuate the voltage. I do not know what the output voltage is for my phone pre. I usually run my Ref 6 between 35 and 40 clicks for both my CD and phone pre. My speakers are pretty sensitive (92db) and I do not need to push my electronics. I was fooling around with my new Ref 6 today and pushed the SPLs way beyond what I should have. My ears need a day or two to recover. |
@bifwynne .......... Yes after about 2 plus years i cant see any bugs in your 6 now. I doubt you will have any problems with it and dont ever need your warranty.. Im glad to hear that...You also stated that you run your 6 between 35 and 40 clicks ? Is that the volume? If it is all i can say is wow..I run my 6 at 23- 28 maybe 30 on some cd recordings and ill tell you that even on 23 that is loud on my rig... I cant even imagine what 35 - 40 would be. lol |
- 27 posts total