The Quads will lose that hardness on top when you upgrade the cabling....
Matching Speakers to amp
I currently own a PSA Stellar 300 paired with Focal Aria 926. I just picked up a used pair of Quad S-5 and I will be comparing the sound. I am not good a using technical specs to compare so I could use some help if anyone has the time to take a look at the amp & speaker specs below and give me some feedback I would greatly appreciate.
The basic question is: from a specification standpoint which speaker pairs up with the Stellar 300 best?
Stellar 300
Gain30.5dB +/-0.5dB Sensitivity for rated output power1.01V Noise1kHz@300 Watts <-100dB Input impedance S300Unbalanced 50KΩ
Balanced 100KΩ Input impedance M700Unbalanced 50KΩ
Balanced 100KΩ Output Impedance50Hz, 2.8VRMS <0.007Ω Damping factor50Hz. 2.8VRMS
8Ω >1100
4Ω >550 Frequency Response@2.8VRMS
10Hz – 20KHz +/- 0.5dB
10Hz – 50KHz +0.1/-3.0dB
Output PowerBoth channels driven 120vac mains, 1kHz, 1% THD 8Ω140W minimum 4Ω300W minimum 2Ω Stable for musical transients
Quad S-5
General description 3-way floorstanding speaker
Enclosure type ABR
Transducer complement 3-way ABR 165mm x3 Bass driver 165mm Woven Carbon fibre Cone x2
Midrange driver 125mm Woven Carbon fibre Cone Treble driver 12 x 45 mm
True Ribbon Sensitivity (2.83V @ 1m) 90dB
Recommended amplifier power 25-175W Peak SPL 112dB
Nominal impedance 6Ω
Minimum impedance 3.2Ω
Frequency response (+/-3dB) 42Hz ~ 23kHz Bass extension (-6dB) 35Hz Crossover frequency 570Hz & 3.2kHz
Focal 926
Speaker driversTwo 61/2" (16.5cm) Flax bass61/2" (16.5cm) Flax midrange1" (25mm) Al/Mg TNF inverted dome tweeterFrequency response (+/- 3dB)45Hz - 28kHzLow
frequency point - 6 dB37HzSensitivity (2.83V / 1m)91.5dBNominal impedance8 OhmsMinimum impedance2.9 OhmsRecommended amplifier power40 - 250WCrossover frequency290Hz / 2400Hz
The basic question is: from a specification standpoint which speaker pairs up with the Stellar 300 best?
Stellar 300
Gain30.5dB +/-0.5dB Sensitivity for rated output power1.01V Noise1kHz@300 Watts <-100dB Input impedance S300Unbalanced 50KΩ
Balanced 100KΩ Input impedance M700Unbalanced 50KΩ
Balanced 100KΩ Output Impedance50Hz, 2.8VRMS <0.007Ω Damping factor50Hz. 2.8VRMS
8Ω >1100
4Ω >550 Frequency Response@2.8VRMS
10Hz – 20KHz +/- 0.5dB
10Hz – 50KHz +0.1/-3.0dB
Output PowerBoth channels driven 120vac mains, 1kHz, 1% THD 8Ω140W minimum 4Ω300W minimum 2Ω Stable for musical transients
Quad S-5
General description 3-way floorstanding speaker
Enclosure type ABR
Transducer complement 3-way ABR 165mm x3 Bass driver 165mm Woven Carbon fibre Cone x2
Midrange driver 125mm Woven Carbon fibre Cone Treble driver 12 x 45 mm
True Ribbon Sensitivity (2.83V @ 1m) 90dB
Recommended amplifier power 25-175W Peak SPL 112dB
Nominal impedance 6Ω
Minimum impedance 3.2Ω
Frequency response (+/-3dB) 42Hz ~ 23kHz Bass extension (-6dB) 35Hz Crossover frequency 570Hz & 3.2kHz
Focal 926
Speaker driversTwo 61/2" (16.5cm) Flax bass61/2" (16.5cm) Flax midrange1" (25mm) Al/Mg TNF inverted dome tweeterFrequency response (+/- 3dB)45Hz - 28kHzLow
frequency point - 6 dB37HzSensitivity (2.83V / 1m)91.5dBNominal impedance8 OhmsMinimum impedance2.9 OhmsRecommended amplifier power40 - 250WCrossover frequency290Hz / 2400Hz
- ...
- 34 posts total
- 34 posts total