2. analog
  3. 136913-102678

Outer ring - who uses and what are your findings

Hi. 

I have been thinking about getting an outer ring to help flatten/couple/stabilize my vinyl as it rotates. 

Curious what your experiences have been. 

Thanks!

p
perkri
wspohn's avatar
wspohn
603 posts
 
I have two systems of hold downs in my tables, one a screw on clamp on the TNT - I've avoided trying a periphery ring on that table as I believe it requires a change in platter and a $2,000 bill that probably isn't warranted by any benefit in sound. The existing set up is excellent and I'd be reluctant to give up the composite platter I have that significantly benefited the sound.

The other table, a Sota Cosmos, has vacuum hold down with a screw on clamp and it is also very effective at taming mildly warped records.

I'd be interested in doing an A/B comparison on the same table, fitted with a stock clamp with and without the ring.  What have people that have done that observed - any benefit on non-warped records, or is it just useful for the odd warped one?

melm
1,074 posts
 
I also have a VPI with an older acrylic-lead platter that I wouldn’t change. So I opted for a 2.5 lb. 3rd party ring. It is a TTW ring; they’re out of business now, but there's still a reasonably priced vendor..

Not only did it improve the sound and flatten disks, but I find it easier and faster to use than the old VPI clamp. Sold the VPI SS center clamp so the $ burden was eased.

I would not be without the ring clamp. Adds flywheel too.
schenk
3 posts
 

Hi , I have missed the post , so my addition might be late or redundant.


I do use a outer ring (and try to avoid using a centering spider if possible to keep the routine as simple as I can).
I must say it works to keep records with slight warp flat. But I think there is more to it then that and I have written a document on the subject, presenting my thoughts and followed up with some experiments and experiences.
I prefer to combine the outer ring with an Oracle and SME style of system; screw on clamp with a specially shaped bottom and a washer under the record.
I regard the ring as the next best next thing to vacuum holding of records, which I have to my availability on 2 of my TT's. I have sent my ring to a work shop for slight modification and when returned (taking some time still) I will also use the ring in conjunction with a vacuum platter to see what benefits may still be present.

As an aside; I am not in favor of dished platters/mats because of the variable azimuth that results from it. A clamp without a dished platter cannot, as skilled its design may be, completely flatten a severely warped record. With a straight, flat platter and mat the outer ring will help considerably in reducing warps.

If you would like to read the document on the subject I could send it. I have translated the doc into English, which is not my home language.

billstevenson
352 posts
 
Schenk,
I would like to read your paper.  Please send it.  Of course there is more to a periphery ring and clamp, or vacuum system as well, than just flattening out a warped record.  Records vibrate a bit as the stylus travels through the grooves, and these devices help to dampen the micro vibrations that develop in consequence.  How much affect this phenomenon has on the sound we hear coming out of our speakers is subject to a number of variables.  I look forward to learning your thoughts of all that might be involved.
Bill
peporter
37 posts
 

 melm233 posts07-13-2018 10:51amI also have a VPI with an older acrylic-lead platter that I wouldn’t change. So I opted for a 2.5 lb. 3rd party ring. It is a TTW ring; they’re out of business now, but there's still a reasonably priced vendor..
 Would you name the aforementioned vendor please?
More to discover