2. speakers
  3. 1448076303

KEF Reference 107/2s + KEF LS50s

Tomorrow I want to try something, and I seek advice about how to implement it. My KEF Reference 107/2 are biwired to Parasound JC 1 mono blocks. I'd like to try substituting a pair of KEF LS50s for the mid and HF drivers of the 107/2s. I propose to disconnect the XLR connections to the mid/HF drivers and connect the biwires that go to those sections to the LS50s. The 107/2s use a KUBE for crossover and equalization, and I propose to continue using that. Does my plan seem feasible?

db
Ag insider logo xs@2xdbphd
honashagen
137 posts
 
I did the exact same thing! I have since gone to a pair of NHT 12" subs.

steve59's avatar
Ag insider logo xs@2x
steve59
1,760 posts
 
I still enjoy my R107/2 in my ht and will continue to.
Ag insider logo xs@2x
dbphd OP
1,628 posts
 
Steve, so do I.  I've replaced the R600C with a Reference 204/2C designed for Reference 207/2s, but it blends seamlessly with the 107/2s.

db
vgrubb
33 posts
 
How does the R600c work with the Reference speakers? I’m considering a set of Reference 1s but I’m not sure I want to go with a Reference center. So I am considering an R600c.
Ag insider logo xs@2x
dbphd OP
1,628 posts
 
In my experience, the R600C had a lower mid-bass emphasis that I found annoying and resulted in their not blending well with the Reference 107/2s.  I'd save for the reference center designed to match the Reference 1s, but you might try an R200C while you save then sell it when you've saved enough.

(The 204/2C is a monster at 3.5' wide, 100 pounds, expensive when you can find one, but it totally disappears in the soundstage, and that's what you want.)

db
More to discover