vpi tnt still a performer?

The early TNTs had a lead-acrylic platter.  No stainless involved.

Whether the TNT or similar table is better off with a solid connection to its base (as with Stillpoints) or a more flexible connection (as with springs, air bladders or squash balls) is likely  to depend on the room and set-up.

@tzh21y   I certainly like mine.

@melm I thought the original Aries shared the same platter as the current model of TNT at the time the Aries was produced.  But I could be wrong.  

@bpoletti IIRC the Aires came out well after the original TNTs. The original TNT platter (and I still use one and would not part with it) was lead filled acrylic. It was a heavier version of what they used on the later versions of the HW-19. (Earlier HW-19 versions used aluminum-lead.) According to what HW has written somewhere, it could be the best VPI platter ever made.

When VPI gave up using lead, they made platters of an acrylic and metal sandwich. It was used on the later TNTs and the Aires. Later they dropped the metal and used acrylic only. A demand for a heavier platter pushed them to the "super platter" which was again a metal-acrylic sandwich.

My recollection is that when they added the metal, to the acrylic it was to replace the lead so that there was, in fact, no metal-lead-acrylic platter.

@melm I have a "modified" TNT with a solid black lead-filled acrylic platter.  Quite good.  The Aries platter I have has a thin (maybe 1/4") layer of black acrylic on top of a metal (I though stainless or aluminum) platter.  Heavy.  Grooved.  Rests on an oil bath bearing.  It is an original Aries Extended table.

Thanks for the clarification.

My opinion....  

I have heard the solid acrylic platters and the solid aluminum platters.  I prefer the Aries platter followed by the lead filled acrylic platter.