2. home-theater
  3. 137319-7805

Solutions and Tweaks from our 2 Channel Audio journeys applied to Video / HT components?

I recently ordered a 2018 Samsung QN75Q9FN TV that comes with a 'One Connect Box.'  It houses the AC input, as well as the standard video/audio Input and Output boards/ports, etc. 

One of my reasons for choosing Samsung over the obvious competitors was this box and the ability to 'work' on it (vs. having the same / the internals within the TV frame).

For example: 

- I can see upgrading the power cord to a custom cord (vs. messing with the captive cord of the LG, for example, into the back of the frame).

- The box allows for optimization with platforms and other isolation / resonance control devices.

- Testing /  A/Bing cables will be much easier.

- Applying filters, etc. prior to the inputs will also be easier.

- etc. etc. etc....

Would love to hear what others have done and your results?

This is IN GENERAL (that is, not necessarily with the 'One Connect Box' per se).

Any other advice and cautions?

Thank you.
david_ten
clearthink
1,421 posts
 

sfcfran"I've been researching the living heck out of new power chord"

 A few things about this incredibly ignorant, confused, useless post first it is power "cord" not "chord" and secondly relying on what others have "reported" is not really "research" at all if you do not in some way correlate your "findings" which are not findings but "hearsay" with what the actual result is you could do that by actually listening or you could make measurements but what you have contributed to the group here is just regurgitation and if it takes you two months to decide what happens with you're new power "chord" you are beyond confused and really should get some help!
david_ten OP
5,480 posts
 
@sfcfran  Thank you very much for your thoughtful and detailed response. It's appreciated and I will respond in more depth when I have some time to do so.
david_ten OP
5,480 posts
 
Here is a short video of the 'One Connect Box' for those reading that may not be familiar with it:

https://www.youtube.com/watch?v=wWrqrGSwmbg


Post removed 
david_ten OP
5,480 posts
 
@sfcfran To answer your questions: 

My budget for a power cord to the One Connect Box is up to 1K though I'd prefer to stay under 1K. I'm fine going with an aftermarket cable maker, but it has to be one that is open to a custom 'IEC' for the power input on the box.

If the box had a standard IEC input, I'd be more willing to spend more and also get what I currently have, the Triode Wire Labs 'The Obsession' PC (because I would be able to use it with other components in the future).

If I go with TWL then it would be their 'Digital American' PC, well under my budget.

Thanks for the brands/diy options you listed. I am open to other suggestions as well.

DIY is not an option for now, though it will make for a great project once I am able to do so.

Looking forward to your power cord journey, impressions and outcomes.
More to discover