Thanks both. I've got good power from a Purepower 1050 and an Audience Powerchord I may use on it (if it will fit). Got Isoacoustics. I'll read up on Jriver. What I had read previously was that it wasn't very user friendly. My goal at the end of this is something my wife will want to use as well.
Integrated amp + DAC + room correction all-in-one for Nola Boxer 1 + REL R328 sub
Dear forum,
I’m looking to upgrade my integrated amp + external DAC source to an all-in-one integrated amp + DAC + room correction box. Budget to $2500, may stretch to $2800 if super-compelling.
I currently use a Creek 5350se integrated amp, with external DAC input from a Yamaha RX-V773 AVR (TI/Burr-Brown PCM1681 DAC chip on whatever circuit Yamaha cooked up).
Loudspeakers are Nola Boxer 1 on Dynaudio Stand 4, and REL R328 sub connected by Neutrix cable to main L/R binding posts on amp. Loongg runs of ProWire speaker and Neutrix cables through crawlspace to loudspeakers / sub.
Music = classical + opera, electronic, new & old rock, alternative, trap, house
Room is 18’ x 12’ x 13’h average ceiling height (2808 cu feet), hardwood floors, random furniture objects. Speakers 6’ apart, REL sub in corner to right of right speaker, listening position 8’ from center of speaker axis.
Requirements (but will flex if compelling):
Here are units I’m researching in DESC order of coveting-ness:
All helpful feedback appreciated including units I haven’t considered. Relatedly, I’m wondering how much I’d give up if I went the ’budget’ route (Yamaha A-S801).
I’m looking to upgrade my integrated amp + external DAC source to an all-in-one integrated amp + DAC + room correction box. Budget to $2500, may stretch to $2800 if super-compelling.
I currently use a Creek 5350se integrated amp, with external DAC input from a Yamaha RX-V773 AVR (TI/Burr-Brown PCM1681 DAC chip on whatever circuit Yamaha cooked up).
Loudspeakers are Nola Boxer 1 on Dynaudio Stand 4, and REL R328 sub connected by Neutrix cable to main L/R binding posts on amp. Loongg runs of ProWire speaker and Neutrix cables through crawlspace to loudspeakers / sub.
Music = classical + opera, electronic, new & old rock, alternative, trap, house
Room is 18’ x 12’ x 13’h average ceiling height (2808 cu feet), hardwood floors, random furniture objects. Speakers 6’ apart, REL sub in corner to right of right speaker, listening position 8’ from center of speaker axis.
Requirements (but will flex if compelling):
- one box, no separates: amp + DAC and ideally + room correction
- ethernet-in on DAC circuit <= can be talked out of this if sensible alternatives
- ’classic’ & useful front-plate design <= no NuPrime IDA-16
- simple, solid, non-stupid remote <= again, no NuPrime. Rogue doesn’t get hi marks here either
- known affinity with Nola Boxer 1 a huge plus
Here are units I’m researching in DESC order of coveting-ness:
- Hegel H190 <= yes $4K USD srp, will stretch to $2800 to buy used
- Parasound HINT6 Halo <= ESS Sabre32 Reference ES9018K2M DAC, new product, no reviews/track-record. No ethernet-in either. Will stretch to $2800 for used ... and probly have to wait a long time for that.
- Creek Evolution 100A <= no ethernet-in. Eventual poor reliability experience with my existing Creek 5350se, which used a lo-quality ALPS input switch, which is failing
- Micromega M-100 <= will stretch to $2800 for used. No ethernet-in afaict.
- Rogue Cronus Magnum II <= reviews suggest cheap-feeling remote. No ethernet-in.
- Yamaha A-S801 <= ’budget’ solution at $900 USD, ESS Sabre ES9010K2M DAC circuit. Needs Yamaha wireless connector for ethernet-in. May not have room correction?
All helpful feedback appreciated including units I haven’t considered. Relatedly, I’m wondering how much I’d give up if I went the ’budget’ route (Yamaha A-S801).
- ...
- 64 posts total
- 64 posts total