2. speakers
  3. 137841-98494

How do you move HEAVY speakers with sharp spikes without lifting?

I have large (175 pounds each) speakers with sharp spikes placed on carpet. I would like to be able to move them a few feet by myself to tweak their positions but lifting them is obviously not an option (I can't even lift half their weight).

I currently use a convoluted method involving tilting them over about 30 degrees, slide a board under spikes on one side, and then repeat on the other side. The speakers almost toppled over the other day which would damage them.

I'm aware there are non-spike alternatives but do not have the money to spend on these options. Any clever moving methods out there? 

Thanks!
wahoospiff
mrdecibel
3,063 posts
 
" How do you move HEAVY speakers with sharp spikes without lifting? "        Very carefully ! I typically find the best spot ( within an inch or two ) for the speakers, use painters tape to mark the carpet ( in this case ), and go from there. With that weight, get a buddy to help ? Enjoy ! MrD.
geoffkait's avatar
geoffkait
23,365 posts
 
Use books that are slightly thicker I.e., taller than the spikes to shim the speakers, then slide the speakers on the books. Have a second person hold the speaker whilst inserting the books. Problem solved.
rbstehno
1,449 posts
 
Take out the spikes, I don’t know any speakers that have their spikes permanently attached to the base. I also use supersliders for my 160 speakers. IMO, if you move your speakers, wouldn’t you want the spikes out to fine tune each speaker before putting the spikes back on
lp2cd
101 posts
 
Some good suggestions. I'd been thinking maybe JATO bottles...
mr_hosehead
210 posts
 
Have you considered using a hand truck?  You know, one of those moving thingies with a pair of wheels and a nose plate to slide under whatever you want to move?  You would not have to buy one (although I admit it was so effective for a variety of thing I did get one) - you can usually rent one from a local hone improvement store (Home Depot, Lowes, etc.) for $15 or less.  I've found them very easy to use and they can be very precise to deliver their load to a particular spot.  Just measure the space between the spikes and make sure the nose plate is narrow enough to fit there.
More to discover