2. amps-preamps
  3. 137605-95931

Micromega M-100/150 field reports

Got a M-100 or M-150?  Share your setups, tweaks and observations, and help out your homies.

My initial M-100 config and some early observations in this thread.

Things I'm wondering about:

  • hacks & upgrades to LAN infrastructure including h/w, and whether they make an objective difference in reproduction from the M-100/150
  • power cords/supplies, with same question (objective difference?)
  • MARS room correction performance & value
  • whether Micromega will have any relief for the abject instability of their Android control app (circa 2016)
usery
djones51
4,947 posts
 
Mine gets lost in internet space all the time. The android app can't even find it now, jriver loses it all the time I don't bother with it anymore I just use my cdp. I can ping it, I can get to it typing in it's ip address. I did all the recent updates. The MARS works bery well. 
djones51
4,947 posts
 
With MARS turned off my Paradigm 85f speakers are barely listenable  so having that alone is worth it to me though I am thinking of upgrading my speakers. The M100 drives them very easy and even after 3 or 4 hours it never gets any warmer than any other a/b amp I have had. The compact size worried me a bit on heat. I use the stock power cord hooked to a panamax conditioner I have had for years, actually it's the oldest piece I have and have never had any problem with it. The network probkems while annoying don't bother me since I am looking to run a wireless streamer/server down the road. 
djones51
4,947 posts
 
Jriver did the same thing to mine as BubbleUPnP. I have to reflash the network firmware to get the M100 recogized whenever it gets lost. I would think it's a bug in the M100. If they get around to that as quick as the android app it might get fixed in a few more years. 
benb
34 posts
 
I haven’t had any bugs on the Mac side of the world.  A couple of 1-2 second dropouts where the WiFi wasn’t keeping up, but that’s all.  I like the internet radio on the app.  
One other configuration for the record is I run Audience Au24 speaker cable to Silverline Sonatinas (v1) with separate wires going to the speaker input on my Adire Rava subwoofer so the speakers run full range.  Good integration, especially with the MARS.  Someday I’ll play with the sub out.  
usery OP
131 posts
 
I would think it's a bug in the M100. If they get around to that as quick as the android app it might get fixed in a few more years.
djones51: yes agree it's likely a Micromega network module firmware bug, rather than the UPnP clients.  That and the crappy android app is laziness on Micromega's part, if not mild sw development negligence.

I haven’t had any bugs on the Mac side...
benb: glad to hear that.  wrt the internet radio feature, on what device are you running the Micromega app?

More to discover