2. home-theater
  3. 137706-303

Audyssey and Tritons

Anyone have experience using Audyssey Multi EQ with a system running Goldenear Triton 1s?  They don't seem to play well together. It wants the subs turned WAY down before it will even run. Then, it somehow thinks they are small speakers. And while it gets the distance about right for the L and R mains, it thinks the subs are way farther away. 
So...any thoughts? In fairness, it comes out sounding  pretty ok. Except the subs will be way too low for music running straight.
secretguy
Post removed 
secretguy OP
1,711 posts
 
Perhaps not by strict definition. But they produce more prodigious bass than anything else I've heard. Including standalone subs.
mzkmxcv
777 posts
 
@secretguy  
  
Get a pair of Rythmik FV18’s and report back ;)
12blistn
35 posts
 
I've found the same thing with my T1s and Audyssey.  After set up, I go back in to manual mode.  I change the fronts to large to use the GE crossover on the T1s.  I have the LFE connected to use the T1s subs for the center and other 4 surrounds.  I have a by-pass mode pre for 2 channel and found if I dial up 1 notch on the back knob from Audyssey setting, it sounds about right.  Your room might be different.  Then I use a SPL meter to adjusts all of the levels equally, manually. After that, I bump up my GE center XXL 1.5 db.  My HT is in an irregular shaped living room, so the acoustics aren't that good.
Hope this helps.
secretguy OP
1,711 posts
 
mzkmxcv...sure. I'll go spend another 3800 to get what I already have.
More to discover