2. amps-preamps
  3. 138256-118117

I can not live without "Room Correction"

Accuphase DG-28

I had been using Accuphase Digital Equalizer since 2001.

It is still working fine.

With room correction, the overall balance is much better with tighter base and flat high frequency.


I can not live without it.

http://media.slrclub.com/1809/10/s07CCj42dv666msrqgf.jpg



Recently Lyngdorf got very popular with good room correction capability.

But I am a tube guy enjoying good timber out of it.

I will not go for Lyngdorf as amplifier.



But I recommend other people to try room correction.

If you are curious, you can try used DG-28 from Japan at 1,700

Accuphase DG-28 Digital Voicing Equalizer Free Shipping (R966 | eBay


It use 100V not 120V so you may need transformer
128x128shkong78
firstnot's avatar
firstnot
248 posts
 
Shkong78,

After seeing the room(s) you have your equipment in,
I see why you are such a prime candidate for the Corrections
Dept.
ron1319
57 posts
 
Firstnot, that’s the same thing I was thinking.
uberwaltz's avatar
uberwaltz
13,381 posts
 
Lyngdorf does make stand alone room correction units, or they did at least.
You do not have to buy say the 2170 or 3400 to get Lyngdorf room correction.

https://www.dagogo.com/lyngdorf-rp-1-roomperfect-room-correction-device-review/
uberwaltz's avatar
uberwaltz
13,381 posts
 
Btw
Gorgeous looking room/ house but an absolute disaster for acoustics ...lol.
Yep you cannot live without some form of room correction indeed!
shkong78's avatar
shkong78 OP
1,485 posts
 
I feed the digital signal to Accuphase Digital Equalizer and then to EMM Dac2.

Without AD conversion, the loss is minimized.

As I am happy with my set-up I will use Accuphase until it stops working.

The interface of Acccuphase is very convenient showing the results before and after correction.


More to discover