2. speakers
  3. 138926-119690

No sound from speakers

Hi, I recently moved house and left my old speakers behind. I kept my turntable (a pioneer PL-120-II) and amp (and old Cyrus Integrated Stereo Amplifier) which I had used together for a number of years and had worked perfectly fine. A friend of mine gave me some speakers to use which are Tannoy mercury mx3. I have connected everything up and, in theory it should work fine. However, the speakers won't produce any sound. After messing around with the settings a little I managed to get very faint and poor quality sound from the top parts of one speaker but no luck otherwise. 

Does anyone have any suggestions on what may be wrong? It seems unlikely that anything has broken since I very carefully transported it all.
eveboo221
eveboo221 OP
4 posts
 
Thanks for the response! I know lots about records but not so much about the equipment. It is a Cyrus one, any idea which listen setting it should be on for a turntable?
mzkmxcv
777 posts
 
First, test that the speakers work. Unplug them from the amp and get a AA battery, and press the negative wire to the negative (flat bottom) of the battery and brush  positive wire to positive (nub) of the battery, you should get a pop sound and the woofer should move. 
 
Secone, make sure you are using the right input selection and your inputs are in the correct input slot.
gbryant's avatar
gbryant
83 posts
 
Phono preamp?
eveboo221 OP
4 posts
 
Since the amp has a phono input I assumed the preamp was already built in?
kalali's avatar
kalali
1,977 posts
 
At the risk of stating the obvious, if your speakers sounded fine with the turntable connected to the phono input of your (integrated) amp, then it does have a built-in phono preamp. 
More to discover