Perfect Path Technologies: Omega E mat

Hey Kevin, A lot of guys have video called Timmy.... then he can talk you right through pasting your  equipment. <3 Glad you are finally trying it! <3 You will be thrilled! <3 Enjoy. Krissy.

Video calling?
Oh heck no....lol
Tim might never recover!
😝😝😝😝

My system has been off for a week and with 6 cards added it was better right away as if it had been on for hours..better yet as the clock turned. Tom

uberwaltz, The pins in the IEC are good to paste.  If you have a tube amp pasting the pins on the tubes a third to half the way up also has a great effect.  It's not that hard and really worth it. After all pins are pasted, plug in and take out and check under a good light to make sure there is no bridging of the TC between the pins.  Enjoy!

Well I applied the TC paste this morning.
Squeezed out what I thought was a tiny amount but it was enough to do my main system, second system, third system AND the ht rig too!
Goes a long way.
This was all power cords, interconnect and speaker cable ends. I did not open up any equipment and do anything inside.
Doing contacts in the main breaker box will be a job for another day.

I must have 3/4 of the tube left! In the freezer it goes.