Duleland break in time

These fit two WE10 wires. I use them. Slightly on the warmish side in SQ. Set screws.

http://www.soniccraft.com/product_info.php/neotech-ncb-80-banana-p-4053?osCsid=eaa2da58afeabf3d0e8d4...

http://www.soniccraft.com/product_info.php/neotech-sk-8y-spade-p-2020

I have not tried these, but they accommodate 5 gauge. They have spades and other choices also....

https://www.douglasconnection.com/Furez-TSTWP48XLNP-Bare-Copper-Banana-Plug-Connectors-Pair-FZTSTWP4...

I use the KLEI on a weekly basis and just cannot imagine 2 of the WEs fitting. You would have to open up the split cut bottom tube used for soldering and then it would. It just would not fit back into the plastic case. Could you fit a nice clean solid core 6 gauge? Perhaps, but two finely stranded 10 gauge conductors is a much different reality as you know. 

The tin is not removable and bonded to the wire. No, it is not removed. 

I have used the KLEI and agree that they sound very natural after break-in. I struggled with 10 gauge wire and have a very hard time believing that a larger gauge will fit properly.

@grannyring Thanks for the recommendations. 

I own some of the Furez connectors and they do accommodate really big wire.  They are said to be pure copper and would work for the two 10 awg WE wires, but for some reason I like the sound of Furutech's copper better, at least when comparing spades between the two companies. 

The attractive thing about KLEI is that the conductor is supposed to be solid copper while most bananas are made from an alloy.  I am disappointed to hear they do not accommodate larger wire sizes.  I have linked their "brochure" below which indicates they will take large wire as quoted below from the brochure;

"Cable Conductor OD sizes up to 4mm (6awg)"

KLEI Brochure:
https://www.partsconnexion.com/media/pdfs/KLEI-83432.pdf

Assuming I am willing to live with "non-magnetic phosphor bronze" connectors these bananas linked below from Furutech look interesting and are supposed to accommodate a wire diameter of 5mm (which corresponds to somewhere between about 4-5 awg.  They allow a set screw connection, same as the FP-201 spades that I like to use.  The only reason I have not tried the Furutech bananas before is that I typically use pure copper connectors.
https://www.partsconnexion.com/FTECH-71115.html