Any ideas?? ARC CD 3 doesn't work

Rsjm80, probably not necessary, but I'll put this out there for you anyway. While ARC has your unit, I would ask the tech to replace any other parts that are subject to aging and spec degradation NOW.

It is my understanding that ARC will not let one if its units out of its shop unless it performs at original spec. But it never hurts to ask. There may be other passives or parts that could use a face lift. I'd ask, even if the switch outs are purely prophylactic.

Thanks,I'll do that

Bifwynne,
Excellent point!

Rsjm80 ... if you get a chance to ask ARC to "freshen up" your CDP, please let us know what if anything ARC recommends. I suspect that if anything, they might just replace some old electrolytic caps.

I think your CDP is solid state, so tubes should not be an issue. Not much else to go bad.

The only other part that could get expensive is the Phillips transport (about $500), but frankly, I've never read or heard that one has gone bad. It's a pretty robust drive.

Will let you know what they say. They were closed for the Thanksgiving weekend when I wrote and asked so, I'm just waiting to hear back but, so far as reported it sounds like all else is up to snuff and will be put back to proper specs.