Benchmark AHB2 power amp impressions?

I have an all Benchmark system - DAC3L > HPA4 pre > 2x AHB2 in bridged mono.

I completely disagree with the comments that the AHB2 is clinical sounding. To me it sounds beautifully balanced and fully capable of reproducing the full range of musical colours and emotions. Notice I say reproducing. The AHB2 is definitely not a coloration machine for injecting flavour, it's an 'as is' device for reproducing whatever is provided by the source. 

I've had 6-7 amplifiers of all types through my system in recent years and have found that amplifiers with 'flavour' eventually become tiresome as the 'thumbprint' is heard on everything that passes through them. I prefer the revealing, chameleon like, character of the AHB2 where the sound changes with the qualities/intricacies of the source. 
I also appreciate these qualities in the ATC monitors I'm using in my system and find the combination musically compelling. YMMV.

@tobes thanks I am considering Benchmark AHB2. How does it compare to latest Class D offerings like Legacy Powerbloc , ATI AT523NC , Nord , Apollon and Hattor etc?. Did you ever get a chance to compare with Class D amps?.

I had a Halcro MC30 class D amp for a while which I really liked. It was also very revealing and not overtly coloured. 
I sold that amp mainly because the highish gain wasn't a good match with the preamp I was using at the time.
Hard to make a fair comparison because I didn't own both amps at the same time and the other components were different. My feeling is that the AHB2 may be superior at low levels, in the high frequencies and in terms of low noise floor. However the Halcro was still impressive in those respects, so it's relative I guess. 
My thoughts aren't really much help to you because I never did the direct comparison and the Halcro isn't necessarily similar to the other Class D amps you mention. 

@aberyclark  Before u buy the Benchmark cables read the following review. 

https://www.dagogo.com/benchmark-audio-dac3-dx-ahb2-amplifiers-review/

I just sold the AHB2 because of a change in system. However, I loved this amp and found it clear and fatigue free. Not clinical at all.  I may buy this amp again if I decided to keep a second set of office speakers.

Thanks, yyzsantabarbara, for the recommendation of the review. Persons who ignore my advice regarding cables will have diminished sound quality, especially if they ignore aftermarket power cords and USB cable.

It is critical to explore the three gain settings on the back of the amp; these make a significant difference and are a feature not found on most amps at the price point.

In recent months I have been exploring my discovery of the huge advantage of the Schroeder Method, doubling ICs. You can read about it as well at Dagogo.com in the Audio Blast: the Schroeder Method of Interconnect Placement. This is no joke, and the Benchmark components rise up to a completely different level of performance than with single IC.

The Schroeder Method has its own warnings and restrictions on use, and it is a do at your own risk activity. I have been running Schroeder Method with the DAC3 DX and AHB2 pair in Mono for a while now and I will not return to single IC use as it is insipid. Anyone using single IC with this combo is getting paltry performance from the components.

Anyone who thinks the performance could not improve that much is wrong. Most audiophiles have no clue how much improvement audio systems can undergo, and they typically are skeptical of large performance gains due to ignorance. They stop seeking huge gains way too early, and they begin to putz around with tweaks, anchoring their rig to the lower level sound. I don’t care to do that.

Currently I have the combo set up with the PureAudioProject Trio15 Horn 1 Speaker (reviewed) and it is performing at a level not achieved in the review through any system using single ICs. The PAP Horn 1 and Benchmark gear are an excellent combo. I have put other components together with it using Schroeder Method and it has performed similarly above the threshold of the review performance. Loom of cables being reviewed are well known and lean toward the affordable end of the spectrum.

If you wish to try Schroeder Method you may contact TEO Audio or Audio Sensibility, as both companies are making a double interconnect as per Schroeder Method. TEO does not do XLR typically, but Audio Sensibility does. I am currently undergoing a review of the Audio Sensibility offerings in relation to Schroeder Method. 

If you wish to explore Schroeder Method further, see the thread in the Cables forum with my name. People are testing it out and sharing their findings.

The sound quality/performance potential of the DAC3 DX and AHB2 is far better than even Benchmark knows. Schroeder Method reveals a much greater sound quality instantly. I am not interested in debating/arguing my points.

BTW, upgrade the fuse in the Benchmark components also for sound quality improvement. No, I do not want to debate that.

Sorry to skew the thread, but this is important for anyone who wants to find the limits of the Benchmark amp. The class AAA technology is far better than anyone realizes. As the Schroeder Method is NOT recommended for class D amps, this puts the AHB2 far, far ahead sonically.