No one actually knows how to lculate what speaker cable they need

Mr. stevcham

The 1000m resistance is given as the 1m is of a very low value. From that figure, it can be calculated by dividing it by 1000 and multiplied by the actual length (number of meters) and also by 2. Any speaker cable of a given length (2.5m) has a wire that goes to the speaker (red) and one coming back (black) so it is 5m all together.

No aircraft carrier. Also no one should place his amplifier 1000m from its speaker. That’s common sense. It seems to me that you could use some more of it!

Mr. wolf_garcia

I asked you some very specific questions, and you answered all around with lots of other things, I didn't ask. I couldn't stop myself from using some humor regarding your say about Mr. Low. It must be even more hilarious if Mr. Low is tall…

The cable you mentioned, has no technical values (spec.!) but a bizarre say about its look…If so far, people were told by the industry to pick their cables by listening, now Mr. Low (or you) offer a cable for the way it looks. That's a new low for me.

In your case, rather than get focused with my questions, I would go spread all around with your answer. Most of it was useless and off subject. Why?

This is a technical speaker cable thread and not how sales people are serving a customer, to get their attention, trust and money.

 

Mr b4icu
Abtenet (batenet) is not from Germany,but not so far away, Scandinavium Sweden.My reason for not having my amplifiers 
more close to speakers is just cosmetic.The speaker placement is about 7 foot from backwall of my room,and with all electronic equipment more than 10 monoblocks and everything else i had to organize it a bit.