Lightspeed Attenuator - Best Preamp Ever?


The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
pubul57
rob67
Your very welcome Rob, and thank you very much for the kind words. Glad you like it so much and how it sounds, you’ve said it like it is.

Are you going to try the 12v Li-Ion rechargeable battery to power the Lightspeed with? It will give a good week of listening before a recharge is needed.
https://www.ebay.com/itm/EU-DC-12V-6800mAh-Portable-Rechargeable-Li-ion-Battery-Pack-fr-CCTV-Cam-Mon...

Cheers George
Post removed 
https://www.dropbox.com/s/jjnbp4n98hsovjv/IMG_20181121_174855.jpg?dl=0
Bonjour excusez mon anglais je viens d'acquérir un Lightspeed et j en suis ravi il est alimenté : 100VA Ultra faible Bruit LPS SALUT-FIN R-core Linéaire alimentation/100 w PSU pour audio DC12V En Option Avec affichage.
J écoute Qobuz Hi-res avec un bluesound node2, câbles rca maison argent, sur ampli classe D N-core, sur des klipsch Rf7 lll., j arrive difficilement à dépasser midi, les RF7 ont  100dB de sensibilité.
Un gars de Cassis en provence en France 
J ai l impression petit problème de traduction, je ne vends pas le lightspeed, je viens de l'acheter 
Hi roddek6 From what I’ve been able to understand with the translator, you bought this used and are very happy with your sound.
What you purchased is not one of my production Lightspeed Attenuators, but looks to be diy unit that has been made that I posted how to do it many many years ago.
https://www.diyaudio.com/forums/analog-line-level/80194-lightspeed-attenuator-passive-preamp-post924...
But it looks to be a close copy of my artwork logo, which makes me wince.

Cheers George