2. analog
  3. 140184-113812

Turntable got absolutely crushed by CD

Long story short, i've just brought home a VPI classic 1 mounted with a Zu-Denon DL103 on JMW Memorial 10.5 with the appropriate heavier counterweight. Had everything dialed in..perfect azimuth, VTF, overhang, with only a slightly higher than perfect VTA. Levelling checked. All good. 

I did a comparison between the VPI and my Esoteric X03SE and it's not even close. The Esoteric completely crushes the VPI in all regards. The level of treble refinement, air, decay, soundstage depth and width, seperation, tonality, overall coherence is just a simply a league above from what I'm hearing from the VPI. The only area the VPI seems to be better at is bass weight, but not by much. 

I'm honestly quite dumbfounded here. I've always believed that analogue should be superior to digital. I know the Esoteric is a much pricier item but the VPI classic is supposed to be a very good turntable and shouldn't be a slouch either. At this point I feel like I should give up on analogue playback and invest further in digital. 

Has anyone had a similar experience comparing the best of digital to a very good analogue setup?

Equipment:
Esoteric X03SE 
VPI Classic, JMW Memorial 10.5, Zu-DL103
Accuphase C200L
Accuphase P600
AR 90 speakers

Test Record/CD:
Sarah McLachlan - Surfacing (Redbook vs MOV 180g reissue)



chadsort
chadsort OP
22 posts
 
@whart I agree...if I were starting out today I'm not sure if I'd go down the vinyl route. At this point I've actually spent more on the analog front (turntable+cart+accessories close to USD3K) than my digital (Esoteric USD2.3k) and by the looks of it, I've to spend a lot more (cart/arm/SUT) before the VPI could match the Esoteric?

The same amount invested in digital could probably push the Esoteric even further ahead, eg, adding a word clock generator

It's getting hard for me to be further invested in vinyl but hopefully more tweaking will help me "see the light"

rodman99999
6,158 posts
 
@chadsort- Since the advent of digital, some recappers have taken to offering the refreshing of an internal phono stage, as an option to their standard preamp service. Is there a way to inquire, regarding your unit? Know anyone that might lend you an outboard unit, for comparison?  Your location(anywhere near Indiana?)
tzh21y
1,654 posts
 
As much as i think the classic is a good table.  I think an older scout with acrylic platter, scoutmaster with acrylic platter, or an older Aries are better.  i never did like the aluminum platter from VPI.
chadsort OP
22 posts
 
@roberjerman thanks, i've never really looked at SUTs before..in fact i thought they were worse than a good phono stage. Guess I'd have to start looking
chadsort OP
22 posts
 
@pbnaudio  Unfortunately it doesn't have the pull-out card and 400-500ohms don't seem to be possible. 
More to discover