Running Benchmark AHB2 in bridged mode and 4 Ohm Speaker

The issue here is not the amplifier. It is the speakers. If you want high quality and high fidelity then 4 ohm nominal speakers are definitely best avoided. The very low impedance is bound to create amplifier issues (stress) with almost any amp.

At any given volume the bridged amp will have better current capability.

Current capability will be the same (29A for AHB2).  Bridging just doubles output voltage.

You can't double voltage without also doubling current.  volts = current times resistance.  29 amps into 8 ohm speakers would be 6,728 watts.  That is instantaneous and not remotely sustainable, obviously.  Actual sustainable current is directly related to watts.  More watts means more voltage and more current flowing.

jon_5912, Yes, current will double when you double voltage, but you stated that current CAPABILITY (meaning max current) will be better. Current capability of AHB2 in bridged mode will be still 29A.

Assuming that you meant current (and not current capability) at given volume, it should state "at given volume knob position".  At given volume (meaning loudness) bridged and unbridged configuration currents will be the same.

Max current will double.  If an amp can double the voltage into a load by bridging then the current capability also doubles.  I'm not sure what the max current rating really means.  29 amps into 8 ohms requires 232 volts.  I'm pretty sure that isn't possible.  Maybe it's theoretical short circuit current or something.