2. tech-talk
  3. 140195-93362

Clean Power without the drawbacks of Conditioning Filtering. Advice?

Hi-

From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.

I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning.
From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.

Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.

Thanks!
128x128dumbeat
Post removed 
atmasphere's avatar
atmasphere
11,962 posts
 
I don't use power strips.

They force you to be using a common power cord with everything plugged into it.
I use separate power cords instead, plugged into enough outlets. I had a few extra added! The ROMEX in the wall is better performance than a flexible power cord, and less heat is made by the AC power connectors (heat means voltage sag FWIW).
orpheus10
8,668 posts
 

Dumbeat, no matter what you use or do, the first step is to run a dedicated line from your junction box to the vicinity of your rig and branch out from there.



lowrider57's avatar
lowrider57
5,417 posts
 
@atmasphere, that sounds like the ideal situation. And I'll bet you run balanced electronics, so low-noise and no grounding issues.

goofyfoot's avatar
goofyfoot
1,384 posts
 
orpheus, a dedicated 20 amp line may make a difference but it doesn't do anything about the electricity coming from outside. My understanding is that there are variables with respect to the degrees of effectiveness from a dedicated line. Would you say this is true or that the results are absolute?
More to discover