Revel Studio 1, B&W 802N or Sonus Faber Cremonas

In my opinion, The MA7000 stands as one of the few integrated amplifiers that is able to combine the fluid sound of a short circuit along with the robust and 'large' sound that is typically reserved for separates. It's super linear piece, and that 5-band EQ is so well done that it really allows you to fine tune your system without causing horrible phase shifts. Tis' a great one-box solution.

If you do go that route, than there would be no reason why not to complete the circle by purchasing the MCD-500 SACD/CD player. It's probably the best single-box CD-Player that McIntosh has ever made (the same can arguably be said for the MA7000). This combination is pretty damned good, and moreover, it has a sound that will lend itself well to an extremely wide variety of loudspeakers.

To offer my completely bias opinion: Of your list, I'd say that Sonus Faber makes for the best match with McIntosh gear. I also feel that Sonus Faber produces more of an 'engaging' presentation, albeit colored when sat directly next to Revel's or B&W Nauts. At that price point, I'd mark Sonus Faber down on the short list and then seriously consider a set of TIDAL Piano's, or even go the opposite way and lay down some cash on a used set of Wilson Audio Watt Pup's. I'd rather take an updated set of Watt Puppy 5.1's or 6.1's over any of the Revel Salons anytime, but then again, that is just my own bias.

Considering the qualities you mentioned, the Thiele 2.4's would work very well. My sustem includes the MA7000, Thiele 2.4's and SuperNova cdp. Also remember by using an integrated amp the cable between pre and pa is eliminated.

I have heard Watt Puppy on Mac and Krell. Did not like. Music sounded like it was stuck inside the speaker.(dont bite me, my opinion. Hated the Grand Slam too.) Heard Revel Salon2s on Simaudio and Bryston and liked them very very much. B&W 802 sounds great on Mac or Classe. Put them on more analytical electronics and they will run you out of the room. Harsh. Sonus are great. They are lively. My biggest hesitation with Revel is the Harmon aspect. I did not know they are built in China now. I still vote Revel Salon2 as they are so smooth.

Actually, I would start with stating a budget first. Recommending Salon2's is all nice and well but I sold my Studio 1's for $4,000, which is about 1/3 of what you would pay for Salon2's. You shortlist suggest you are shopping in the 4,000 - 6,000 used range, so let's stick with that parameter. Of the three you mentioned the Studio's and 802 can go head to head and personal preference can swing it either way. I would not put the SF's in the same league, but that is just me. If you won't have a chance to listen personally before buying, I would just take my chances and make sure you get a very good deal ($4,000 for the Studio's is about as low as it gets), so you can always sell at minimal loss should you want to try something else. Live dangerously - throw in a bid for $5,000 for the 802 currently auctioned (You have a few hours left).

The new Revels are not made in China. My Salon2s, purchased earlier this year, were "Made in the USA". I understand Harmon is moving some driver production to Mexico, but I haven't read how it affects the Salon2 series.