2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
vpi's avatar
vpi
223 posts
 
Ketchup,
I briefly considered putting the ET-2 on the Garrard but considering the obscene amount I paid for the plinth I quickly decided against drilling more holes.  I'll eventually be putting the Delos back on the Garrard and I was never satisfied with the Delos on the ET-2.  But it really sings on the Garrard/Ortofon rig,

If you decide to try it, let us know what you hear.
Cheers,
Harry

ct0517's avatar
ct0517 OP
2,041 posts
 
considering the obscene amount I paid for the plinth I quickly decided against drilling more holes.

What causes more audiophile anxiety ?

A) Putting an extra hole into a - let's call it a "creation"

or 

B) Getting the hole position correct.

???

***************************************

Many years ago I made my own plinth (for fun-still have it) out of birch, mdf, some other materials. 50-60 lbs ? I think.

A sandwiched block with a cutout for the motor/platter - in this case for an SP10.

One of the main lessons I learned from that adventure, is that removable armboards, or arm pillars that swivel, are worth their weight in gold as far as this audio hobby is concerned. The extra work, skill and time that goes into making this option possible, is considerable and definitely not for the hobby person.

frogman
7,473 posts
 
Speaking of removable arm boards and audiophile anxiety:

My (now “hybrid”) TNT 6 came with an arm board drilled for a SME V.  I was having difficulty getting a blank or predrilled armboard for my ET2, so I went ahead and had VPI drill the SME V board to accept the ET2, SME cutout and all.  I was eventually able to source two blank armboards which VPI drilled for the ET2 and for the Syrinx PU3 which I keep “just in case”.  Wouldn’t you know it, I was convinced that the arm board with the SME cutout sounded better and actually went back and forth a couple of times with the two arm boards to determine which actually did sound better; PITA.  Eventually settled on the new board without the SME cutout simply because it looked so much better 😊.

Happy New Year to all!
Post removed 
ct0517's avatar
ct0517 OP
2,041 posts
 
**** ET2 Yellow Sticky **** Cartridge Setup Guidelines ****

Tonearm Version _____ Armwand Version _______ I Beam/Leaf Spring Combo

General Guidelines.

********************************************************

Tonearm Version

ET 2.0 ___________________________ ET 2.5

Higher Compliance Cart ______________Lower Compliance Cart

********************************************************

Armwand Version

Aluminum __________Carbon Fiber _______Magnesium

High Compliance ______Medium__________Low Compliance


********************************************************

I Beam - Leaf Springs - (a higher mass cartridge needs more
counterweight mass, which in turn needs a stiffer decoupling spring).

Single Leaf Spring _____Double LS __________Triple LS ____

Low Mass __________Medium Mass_________High Mass

*********************************************************

This info is endorsed by Bruce Thigpen

More to discover