2. analog
  3. 144104-100047

broken dreams - new cartridge help please!

I need help on selecting a replacement MC cartridge. Two years ago I put together my first serious vinyl system:

- Transfiguration Axia S MC cartridge
- VPI Scout 2 with upgraded heavy platter and JMW 10 tonearm
- EAR 83P preamp
- Line Magnetic LM-211 IA tube amp
- Legacy Studio HD Monitor speakers

Note I listed the cartridge first - I did a lot of research and perhaps spent an inordinate amount on it, but I got an amazing deal from a EU vendor from Audigon ($1100US - new in box). Loved the set up! Sound was better than I thought possible :-)

Now the sad part - last week my house cleaner snapped the cantilever off while dusting :-(. I had told her to leave the stereo to me to dust, but I guess the desire to clean what I hadn't for some time got the better of her. As the 10 JMW sticks out a bit from the VPI base and the acrylic dust cover no longer fits, it was exposed. Unfortunately, the plastic cantilever guard was such a difficult fit that I was more afraid of snapping the cantilever off trying to put it on and take off that I never used it.

I checked with Needle Doctor about replacing but as I suspected they cannot. I have emailed Immutable/Transfiguration but no response :-(

Sorry for the long preamble, but I had to commiserate with some one who might feel for me (my wife doesn't get it- she is happy listening to an Amazon Echo Plus).

Checking current prices on the Axia reveal $2450 new, $1600 used. Currently cannot afford that. I need to come in under $1000. Need some help from you more experienced audiophiles out there! My listening tastes are a bit eclectic, but center on rock and blues. Want to stick with a low output MC.

Here are some that I have been considering:
- Ortofon Quintet Black S MC
- Audio-Technica AT33Sa
- Dynavector 20X2L
- Sumiko Blackbird Low MC

I know some of these may retail over $1k, but I am not adverse to a low hour used cartridge or scouring the net for good deals.

Any help on the above options or alternatives would be very much appreciated :-)

Thanks, Rick.
rykk999
rykk999 OP
10 posts
 
Hi folks,
thanks for the further dialog. I did explore trying to get the cartridge repaired by Transfiguration, but I cannot get a response from them. Unfortunately,  I have heard that Mr Seiji Yoshioka, the master crafter of Transfiguration cartridges, has died, which may make it impossible to repair. 
So, what to do with a cartridge that retails for $2450 that has a broken stylus? I can't afford a new one, but didn't want to give up on this one. I have sent it to Steve Leung at VAS. He is going to replace with a boron line contact cantilever. I understand that it is not the original, but I am hoping it will sound better than any cartridge I could get for under $500.
I think it is also wise to acquire another new cartridge at some point as a backup and for comparison. I do want to stick with low output MC to pair with my EAR 834P.
I will report back on how things go. It will be another 1-2 weeks before I get it back.
chakster's avatar
chakster
6,144 posts
 
I understand that it is not the original, but I am hoping it will sound better than any cartridge I could get for under $500.

Why do you think so ? Last year i’ve bought on ebay Dynavector 23RS MR with Ruby cantilever NOS and Dynavector KARAT 17DS MR with Diamond cantilever for about $500 each. Diamond is the most expensive and exotic cantilever. Both carts are fully original, both with MicroReach tips. Both are LOMC made in the 80’s.

The quality can be superb even for a relatively low price, you never know how cheap you can buy unused vintage cartridge online.

Instead you paid $500 just for the cantilever/stylus and repair fee. Of cource it’s up to you, but the price for repair job and materials is equal to the price of the new cartridge. I have no idea why people think that $500 for repair with third-party parts (not the original) is cheap in this case?




johnto
1,031 posts
 
If you're getting a$2400 cartridge fixed for under $500 its $2000 cheaper than buying a new one. 
My rebuilts have sounded good or better than new.
uberwaltz's avatar
uberwaltz
13,381 posts
 
Chakster

Not everyone has the love or trust for vintage carts as you do.

I have a few and pretty happy and comfortable with buying more and learning but it is not for all types.
chakster's avatar
chakster
6,144 posts
 
@johnto

If you’re getting a $2400 cartridge fixed for under $500 its $2000 cheaper than buying a new one.

If you’re sending your High-End cartridge to a third-party vendor you have no idea what you will get. You digits means nothing. If you can’t send a cartridge for rebuild to the original manufacturer (read a cartridge designer) why you’re buyin such expensive cartridge? Just to send it to third-party vendor ? I just don’t understand the logic, really. You want a US vendor to fix a Japanese cartridge from a well known designer ? If the original designer is available this is the best way to fix a cartridge if you really like the cartridge.

My rebuilts have sounded good or better than new.

I often read such comments on the forums, seems like a third-party service is always better than original cartridges voiced and tuned by legendary cartridge designers?

You’re free to believe in this BS, but you can ask any cartridge designer (if you can) why it’s not true, luckily we have Jonathan Carr on our forum and he explained why it’s not a good idea.

Your cartridge can be better than the original only if you’re upgrading an entry level cartridge with some better and more expensive parts such as cantilever and stylus tip.


More to discover