Slim
loading MMs is about both C and R. Optima are different for every cartridge or certainly every brand of cartridge. So for sure I would not say that every single MM cartridge will sound better at 100 K ohms. I have found that my old Grado TLZ and my Grace cartridges definitely do sound better with 100 K load and no added capacitance, over and above the cable capacitance and the input capacitance of the phono stage. Testimony from others like Chakster and Raul leads me to believe that 100 K might be best for the majority of MM cartridges, but certainly I do not know that for a fact. Also, it’s not only about opening up the high end. The entire audio frequency bandwidth comes through with a greater clarity for cartridges that prefer 100 K to 47K. Like I said if you keep lowering resistance below 47K there is the risk of rolling off your high frequency response. Even your own testimony suggests that the beneficial effect you perceive at 22K may be related to rolling off hf. Like a tone control.
Thanks for the clarification regarding your grounding system. Even with your more detailed description, however, I am not sure it’s a good idea to attach your phono stage ground and your general audio ground to the ground system you use for your other devices. I guess only your experience can vouch for that.
loading MMs is about both C and R. Optima are different for every cartridge or certainly every brand of cartridge. So for sure I would not say that every single MM cartridge will sound better at 100 K ohms. I have found that my old Grado TLZ and my Grace cartridges definitely do sound better with 100 K load and no added capacitance, over and above the cable capacitance and the input capacitance of the phono stage. Testimony from others like Chakster and Raul leads me to believe that 100 K might be best for the majority of MM cartridges, but certainly I do not know that for a fact. Also, it’s not only about opening up the high end. The entire audio frequency bandwidth comes through with a greater clarity for cartridges that prefer 100 K to 47K. Like I said if you keep lowering resistance below 47K there is the risk of rolling off your high frequency response. Even your own testimony suggests that the beneficial effect you perceive at 22K may be related to rolling off hf. Like a tone control.
Thanks for the clarification regarding your grounding system. Even with your more detailed description, however, I am not sure it’s a good idea to attach your phono stage ground and your general audio ground to the ground system you use for your other devices. I guess only your experience can vouch for that.