The Levinson Sound?


I have never listened to a Mark Levinson amp, but am curious as to what sound characteristics they have, especially the older amps from the 90's. How do they compare to say Pass Labs amps? Any info would be appreciated.
333jeffery
I also ran a pair of stacked Quads for over a decade with a pair of ML2s so I am qualified to comment.  Yes the ML2s can and do sound wonderful with the Quads but do sound dark and grainy when compared to some of the better modern amps.  

That said, I no longer own any ML amp (I prefer Goldmund amps), though I still own and enjoy a ML-7A preamp, which remains one of the best preamps ever
I have a mark Levinson no 336. I have it paired with a mark Levinson number 32. Also have the no 31.5 and 30.6. I bought it to replace the no 23.5. to my ears there is no comparison. The no 336 is a much nicer sounding amp!
All ML are great, except for one.
They really tried to cure the evils of that topology class, but only made things worse, it was never going to happen the doomed Class-D No53 monoblocks
https://www.stereophile.com/content/mark-levinson-no53-reference-monoblock-power-amplifier

Cheers George
ML-2 is a legendary amplifier without peers - really.
Not only can it compete with modern designs (2020), it’ll subjectively and objectively outperform 99% of them.

Sonics far superior to anything of the time (70s) from Threshold, Krell, Phase Linear, Harman, Marantz or anything else. Phenomenal build quality & design.

ML later opted for far more complex, multiple gain-stage, massive feedback circuits and so was the magic of ML-2 gone forever.
I had a dealer-friend and had the chance to frequently listen to the newer ML amps (and other brands for that matter) and compare them to ML-2’s.
Nothing came even close to the sound of the Ml-2’s.

I found (and still do) the sound of the newer ML creations unable to match the sweetness, effortlessness, natural timbre and depth of the ML-2’s, 33 and 33H included.
ML-53’s sounded way too flat and bright for my taste, almost pierecing :-(

Remember: For best sound quality RUN SINGLE ENDED, NOT BALANCED!This is very important.

Problems?
Low power:
For low sensitivity speakers playing in large, deadening rooms, 25W in 8 ohms is not gonna cut it.I know guys who’ve modified it for higher power (60W in 8 ohms), but you’ll need electronics knowledge and tools to do it, so not recommended for John Doe.

Logistics:
Big and heavy. You must put them in your own separate listening room. Or as my wife put it: either they go or you go ;-)


Electricity consumption:Actually not that bad, compared to say Aleph 2’s or some older Krell (prior to Plateau Bias) which were electrical ovens.


I’ve heard a cpl of Chinese clones... they’re not even close, so don’t throw away your money. In one word: If you find one = get it !!
I have ml 532 and 326S cd ml 512 speaker jbl DD66000 sound fantastic dynamik details everything in very High performance class speaker cables Bertram proxima CU and silver not be wire just changes between Them from time to time 
Use to have ml 433/380S and ml 390 S and speakers like jbl 4430/35 4343 and jbl 250 jubilee and I dont miss any of these compaired with my set up now