Any one try the new Synergistic Research BLUE UEF Duplex receptacle?

Use of small strips of fo.Q material is highly recommended. As the top plates of US spec receptacles are usually held by only one screw the edges will unavoidably resonate. Adding strips of fo.Q across the edges of the top plate to the wall or outlet frame will damp this resonance. Be careful not to overdamp however as this can deaden the sound. This phenomena may also be why slightly loosening the top plate screw can sound better the having it fully tightened

@whostolethebatmobile  Thanks for bringing the fo.Q TA-102 to my attention. I just placed an order.

Question to you and folkfreak and others who have used it:  Advice on the 'Thick' 1mm tape vs the 'Thin' 0.33mm tape? Thanks.

Thin definitely. The thick is only for use in large blocks damping top plates and the like

@folkfreak   Do you see application (for the thick version) in the main electrical panel? Thanks.

I’m not a fan of damping the main electrical panel. I tried this and it killed the sound dead. My preference for the panel is to remove the door or leave it open. The thick fo.Q is useful on large capacitors, transformers and the like. But overall use fo.Q sparingly, less is more!