Ingress Audio Engineering


I recently discovered the benefits of isolation. Don't know how many of you are familiar with Barry Diament's  recommendations for his hip joints. The recommendation for the economical DIY set up worked well for my stereo; (lightly inflated bike innertubes, wooden egg holders supporting stainless steel balls).

http://www.barrydiamentaudio.com/vibration.htm

A month ago I bought Isoacoustic Oreo's. 3 per component (weight appropriate) and was very impressed...at first. After several days of settling my music sounded dull and lifeless. I reread the optimal weight recommendations, re-calibrated weight limits with temporary improvements. To my disappointment I realized the Oreo's could only be compressed (especially after the suction seal was formed between them and the component or platform the component sat on). Sure they rocked in all directions, but they didn't glide in all directions. Only horizontal isolation was taking place so I coupled the Oreo's with Barry's economic hip joints which has greatly improved the SQ. I'm loving it but I still feel there's room for improvement. Mainly because I own the Hfiman HE-6SE HP's and I run them through my power amp's speaker taps. So I want Barry's upgraded hip joints under my amp. I'm interested in Ingress Audio's vibration isolation rollerblocks.

http://www.ingress-engineering.ca/products-and-services.php
I've looked up info about their level 2's and 3's but specifics on their differences aren't given. I know Barry says the blocks should be machined smooth to a certain degree. I left a message with Ingress, but I'm impatient and wondering if perhaps the level 2's aren't as smooth as the 3's. The smoother, the greater the improvements. My question is does anyone know the differences between their Level 2 and Level 3 rollerblocks?
mewsickbuff
Re Stacore -- I'm not sure I see anything new or particularly innovative in their approach. The basic isolation is passive pneumatic which is well established and the top plate is slate -- which some like, others see as problematic. They've put it together in a nice and easy to use package but I'm disappointed by the lack of detailed measurements so we can see how they really compare with alternatives in the 1-10Hz range. If anyone has these can you post a link -- I couldn't find them on the Stacore site

If we really want to talk top end I'm a big fan and user of the Taiko Tana -- their modified Herzan. Here the top plate is Panzerholz which also has its detractors -- really there are no simple answers! 
It’s easier to get better “action” for the set-up with four springs, all things being equal. By “action” I mean how easy it is to put the top plate and component into smooth vertical up and down motion by bouncing the top plate manually. For moderately light components I would preload the springs with granite or bluestone. My Cryo Baby Prometheans are rated at around 40-50 lb for four springs. Add a spring for every ten pounds over 50 lb. My Super Stiff Springs are rated at around 80-120 lb for four springs.

My springs are designed to achieve better performance (circa 2-3 Hz) than almost any pneumatic device. And there is no leakage issue, no guessing at the air pressure, and no friction or damping issues, either, with my springs as there are with pneumatic designs. When you think about it it’s kind of a no brainer. 😳
Great, thanks for the info Geoff. I’ll check the weight of my set ups.

What is bluestone? Is that slate?

Folkfreak, isn’t Herzan an active platform originally designed for microscopes?
I used to buy bluestone 18”x18”x3” slabs at Home Depot for around $20 each. Dunno about availability in other locations. 

Everything you never wanted to know about bluestone, 

Bluestone is quarried in western New Jersey, Pennsylvania and eastern New York.[15] It is also quarried in the Canadian Appalachians near Deer Lake in Western Newfoundland.[16]The Pennsylvania Bluestone Association has 105 members, the vast majority of them quarriers.[17] Bluestone from Pennsylvania and New York is sandstone defined as feldspathicgreywacke. The sand-sized grains from which bluestone is constituted were deposited in the Catskill Delta during the Middle to Upper Devonian Period of the Paleozoic Era, approximately 370 to 345 million years ago. The Catskill Delta was created from runoff from the Acadian Mountains ("Ancestral Appalachians").[18] This delta ran in a narrow band from southwest to northeast and today provides the bluestone quarried from the Catskill Mountains and Northeast Pennsylvania. The term "bluestone" is derived from a deep-blue-colored sandstone first found in Ulster County, New York.[citation needed] It can, however, appear in many other hues, mostly shades of grays and browns. Bluestone quarrying is of particular value to the economy of Susquehanna County, Pennsylvania. The Starrucca Viaduct, finished in 1848, is an example of Pennsylvania bluestone as a building material.[17]

Starrucca Viaduct, Pennsylvania, U.S.

The other, lesser known, type of American 'bluestone' is a blue-tinted limestone abundant in the Shenandoah Valley of Virginia. It is a limestone formed during the Ordovician Period approximately 450 to 500 million years ago, at the bottom of a relatively shallow ocean that covered what is today Rockingham County, Virginia. The limestone that accumulated there was darker in color than most other limestone deposits because it was in deeper waters exposed to less light. The darker blue color resulted in limestone from this region being dubbed bluestone and with two sequences measuring about 10,000 ft thick, it gives the area one of the largest limestone deposits in the world.[19] The stone eventually fades from a deep blue to a light grey after prolonged exposure to sun and rain. Given the abundance of the stone in the Rockingham County area, the first settlers used it as foundations and chimneys for their houses. When James Madison University was built, the local bluestone was used to construct the buildings because of its high quality and cultural heritage.[20]