"Dazed and Confused" about upgrading current speakers


I currently have a pair of Golden Ear Technology model 7's. I don't have any particular or serious gripes about their sound quality. However, I think I could do better in overall sound  quality, especially highs and midrange detail and clarity. I know and have read they are noted for their low distortion.

The following speakers may not be upgrades but I have given them consideration:  Ohm Walsh Tall;  Neat Iota and Iota Plus;  and the Larsen 4.2 .

The Larson and the Neat seem overpriced, but their size and profile are attractive  In addition. the very new  Magnepan LRS..... and Magneplanar ..7.   I realize that none of the above may provide a major and noticeable upgrade in sound. I am not as mobile as I used to be and so can't go county wide speaker shopping..

The last go-around of looking, I considered the Revel F-206 and the PSB Imagine T-2, but not many come up for sale, especially the PSB T-2.  The Revel  F-206 I have somewhat lost interest because of their size. 

My electronics are definitely worthy of any of the above speakers and then some   The amp is a BAT VK-200  (100RMS)   Conrad Johnson PV-14L SE; preamp line stage;. Ayre CX7e mp CD player The separates could be replaced by a integrated amp, but that is not in the works at this time

Advice and recommendations welcome

Thank you,

S.J.

   


sunnyjim
Post removed 
I would try and bypass the CJ preamp, as it could be adding to much warmth, robbing you of exactly what you are saying you are missing ( try an inexpensive passive unit, such as a Schiit Sys, or a Douk Audio passive, the HiFi version on the Bay ). I went passive awhile ago, and would not go back to using a preamp. Enjoy ! MrD.
This I can chime in on for I have been involved with upgrading the 
Loudspeakers internal wiring , connectors and especially upgrading the cheap stock crossovers , that most companies skimp on you can Dramatically improve Every aspect of its performance  by putting in Highquality boutique capacitors ,resistors,and inductorsas well as quality solder  .i just finished a $2k Monitor That competes with ease speakers 3x that. This is a very logical  option if you ,or a friend can solder ,
Post removed