2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
flemke
596 posts
 
I wish I could report back some solid findings. I cannot. My personal life has been far too busy and I just could not pay attention that well. I do believe that I did put the arm back together better than it was. This could give me better performance on its own.
mruggs's avatar
mruggs
2 posts
 
Has anyone thought of a way to construct a lift for the arm, like what they have for regular pivot tracking tonearms? I‘ve tried to come up with a way to do it, like rotating the tube at the end of play. Anyone have any thoughts or suggestions?
ct0517's avatar
ct0517 OP
2,041 posts
 
^^^^^

Mruggs2 - I haven't ....but....on another note. 

I am most intrigued by those brave souls who have actually removed the cueing mechanism in its entirety. I only know of one person that has reached this level. R Krebs.

The consumption of ? during music can increase bravery, but decreases the dexterity imo, needed to handle the naked armtube (void of linkages), which holds the precious. Or does consumption of ? actually help others calm down ?

************************************

I 'm breaking through
I'm bending spoons
I'm keeping flowers in full bloom
I'm looking for answers
From the great beyond

REM - the Great Beyond

*********************************************
Greetings and Happy July 1, "Canada Day" to everyone.
From the True North Strong and....still free.

richardkrebs
422 posts
 
@ct0517. Chris. are you trying to lure me back here?
Removal of the lifter mechanism affords a slight improvement in focus, image precision. I used a foam rubber block mounted on the plinth at the edge of the platter which the cart rested on when parked. And yes, stay away from any dexterity altering substances when using the arm sans lifter.

Substituting the carbon fibre goose neck for the aluminium one brings about a similar but larger increase in focus. One does loose some versatility though as it has only one "height" setting and it is of course heavier so lower compliance carts are  called for.

Cheers .      
richardkrebs
422 posts
 
Should read "Substituting the aluminium goose neck...…"

ie using the Al instead of the CF

Morning Joe has just kicked in. 

Cheers 
More to discover