AC Dedicated Line


Hello guys
I will run three (3) dedicated AC power lines: one for my stereo system (power amp, preamp, DAC, etc) and two for my stereo subwoofers (one line for each one).

These three circuits will be connected directly to the main AC board of the Electrical Comany wich provides me the service right at my door.

They will all share the same ground cable, wich I will connect to a dedicated ground bar, but I would like your opinion about sharing the "same neutral line" on these circuits. Could it affect the sound quality? 

If I have to send three different neutral cables, one for each circuit, I will need more cable to run through the house and it will be more expensive and complicated.

Please I would appreciate responses with real experiences. I don't want to start a technical discussion. I know at the end, in the main board, they all will share the same neutral line, so electrically it should be the same, but in this crazy audio world who knows for sure if soundwise it will be the same....

PS: by the way, I will run 4 or 6 mm2 cables (I guess about 11 to 9 AWG on the US scale). Here in Argentina we measure cables by square millimitres.
plga
My Pro Electrician installed a separate 15 Amp AC line with its own separate Circuit Breaker Box which is (lucky) on the outside wall of my listening room (garage)..
I used a mix of the best Oyaide AC Plugs, installed upside down (Hospital style)..
I run my Freya Preamp into the wall directly (Pangea AC 15 feet) and everything else into a Furman 15i Elite..
I got rid of all fluorescent lights..
Black black sound..
No Electrical Problems ever.. I run PS Audio Steller M700 Mono Blocks..
He also put a small Tap for grounding if desired..
He said for me to call him when I’m ready for a 20 Amp hookup..
If using dedicated lines and keeping your musical signal pure 
don’t put the surge protection in a box to corrupt line conditioning 
a dedicated unit such as the Siemens is excellent handles med spikes to large 100k surge protection right at the breaker panel 
and uses 2 - 20 amp breakers right after the main breaker 1st in line protects both sides of the buss Siemens First surgeFS100
or 140. Great piece of mind  and 10 year warranty,and led sensing 
and audible alarm if fault detected.

audioman58
If using dedicated lines and keeping your musical signal pure
don’t put the surge protection in a box to corrupt line conditioning
a dedicated unit such as the Siemens is excellent handles med spikes to large 100k surge protection right at the breaker panel ...
I'm not sure exactly what this means regarding "keeping your musical signal pure" but using a dedicated line with surge protection at the service panel doesn't obviate the benefit of power conditioning between it and an audio component ... at least in some systems.
Good catch! What is the music signal? That’s what I’d like to know about. 
Some valid and some not so valid points on this subject.  
The amperage of a circuit breaker has several requirements.  Example: a 15 amp breaker should have the correct wire distribution...not to exceed the capability of the breaker....this should be 14 gauge 2 conductor + ground.  A 20 amp circuit should be a 20 amp breaker with 12 gauge 2 conductor + ground.  Exceeding the recommended wire gauge for a specific amperage breaker is just plain dangerous.
Attempting to wire 3 separate circuits to your hi-fi room to 3 separate outlets is a terrible waste of $$ and you will absolutely assure yourself of a serious ground loop & concomitant noise/hum.
Go ahead and bring in 1 dedicated 20 amp circuit to a good quality duplex (2 plugs like most household outlets) outlet.  
Many people are under the misconception that the electrical ground for your home/apartment/domicile (in the foregoing referred to as home) is provided by your electric company.  Very false.  The ground is a true earth ground made by the electrician that wired your home.  It is a 6' copper rod driven in the ground and connected to your electrical panel with a large single conductor to the ground bar in your service panel.
All of your grounds go to that ground bar in your service panel.
The only wires that your electric company brings into your service panel are the supply or positive wires (2) and a single common conductor.  
The 2 separate supply wires are 120 V and supply the 2 supply bars of your service panel and the single common conductor go to the 2 common bars of your service panel.
The breaker fits over the supply bar and common bar to make a circuit breaker perform. 
The best arrangement is to purchase a hi-quality (example: Furman) 15 amp power strip.  You can spend additional $$ for a power conditioner or the like but I would recommend just using the power strip first.

Best