2. misc-audio
  3. 1415278670

How can Acoustic Revive RR-888 produce 7.83hz?

This is not meant to be a bashing post. I want to try and understand this device as I find it very interesting. I have no scientific background. I presume that 7.83hz is transmitted as a wave. I have previously gone to a professional sound room that was designed by world famous studio designer Tom Hidley to cleanly produce 20hz. Firstly the room needed to be of a certain dimension (which was bigger than my listening room). Secondly the speakers were large Kinoshita studio monitors with dimensions of 1050/1300/800cm with each monitor having 2 large bass drivers of some 16-18 inches in diameter. They were driven by Kinoshita-JMF HQS4200UPM mono power amps which each delivered 450w into 8ohms.

Presumably you would need a very large room to produce a 7.83hz wave? To quote from the Acoustic Revive website, "...we developed and manufactured a device to generate the 7.83Hz electric wave artificially, the Ultra-low Frequency generator RR-888". Am I missing something fundamental? How can such a small device generate such a wave in my 22x12x10 foot listening room?

Thanks
128x128bluewolf
brauser
525 posts
 
An excellent question! The thing does make quite a difference and there is a growing awareness in the audiophile community that this is not just another
'tweak-of-the-week'.
sksos1
387 posts
 
I have no idea how it works but I've brougth one over to 5 friends homes and every one heard an improvement and bought one, some rooms were more subtle that others and some were jaw dropping good!

(Dealer disclaimer)

PS: If you live in the Boston area I'd be more than happy to bring one by for a listen (as soon as I recover from some back surgery).
geoffkait's avatar
geoffkait
23,365 posts
 
One way to do it is to produce two waves of higher frequency that are separated in frequency by the desired 7.83 Hz. The difference frequency will magically appear in the room. The real question is how a 7.83 Hz electromagnetic wave can fit in the room, you know, since it's 25,000 miles long?
djohnson54
396 posts
 
I don't own this device nor have I heard it. I do remember reading a review of it a while back - mildly interesting.

My thought is that it's not that hard to make a surface (diaphragm) vibrate at 7.83 Hz and this will "attempt" to create a 7.83 Hz waveform. Just because the wave cannot fully propagate in a given space doesn't meant that it's not having an audible effect in that space. If the company claims that there is a complete 7.83 Hz wave in that room then they need to go back to physics class. Also remember though that the lower the the frequency, the more acoustically transparent walls would be to that wave.

Note that this doesn't address the amplitude of the wave produced. The size of the "driver/diaphragm" would directly impact that (as was indirectly pointed out by Bluewolf in the OP). So, even though the wave will propagate outside of the room, I doubt the amplitude of the wave would be very large.
bluewolf's avatar
bluewolf OP
66 posts
 
Thank you to all, & particular thanks to Sksos1 for your very kind offer to come and listen to your unit, but I live in Hong Kong. Let me know if you are ever over this way. I recently bought a RR-888 and am still experimenting & listening, powering it with my KingRex PSU MK2. I find that I enjoy this hobby more, the more I know about my components and hence the original post.

Happy listening,
More to discover