Audio Research VT100 MK1 and LS15 HELP!!!


I recently bought this set VT100MK1 and preamp LS15 and while I was at this seller house he demonstrated the sound from his online Tidal on TV connect optical to the DAC Luxman DA - 06 then this go to the preamp LS15 and out into the VT100. This set up sounds amazing at his house. However, when I came home play CD from the Sony X1100ES Blu-ray player RCA output into the LS15 and out to the VT100 and it sound horrible - no bass at all in any type of music.  The sound sometime muffle and not clear and most importantly the bass missing tremendously. Im using a pair of KEF R900 Speakers. What is wrong here? can anyone help me correct the sounds? it is because I didn’t have the Luxman DA - 06 DAC? or it is because I don’t have those fancy hundred - thousands of dollars cable?  or the CD source is playin at 41khz /16 bit not high enough signal?  

This is my first system and I don’t know why I can’t get that high fidelity sound from the ARC equipments.  I'm waiting for the Audioengine B1 to arrive so I can stream Spotify into the LS15.   What is wrong with my set up?  Thank you in advance for helping me solve this.
kentrent
Would it damage the system if i dont have jumper connected while using rca?
No.  It just wouldn't be sonically optimal, and it might result in a bit of hiss and/or hum.  

Regards,
-- Al


Post removed 
My bad! The jumpers install into the XLR balanced input jacks. I must have been having a brain fart. They would have to be removed before the balanced cables could be plugged in.

All my posts about the jumpers being installed when using balanced cables are moot. It can’t happen...
Jim
The jumpers install into the balanced output jacks.... They would have to be removed before the balanced cables could be plugged in.
@jea48  Jim, no, I'm pretty certain that you were right the first time. The OP said that his amp is a VT100 MkI (which I would think is the same thing as a VT100 that has no Mk designation indicated on it). Your comment that I quoted would apply to the MkIII, and perhaps to the MkII, but rear panel photos of the VT100 with no Mk designation show connectors for the jumpers that are separate from the XLR input connectors.

Best,
-- Al