magnepan experimenting


i have my modified mmgs performing pretty well. so tonite i turned them around to face wall with the metal perofrated side facing the room. this moved the tweeters to the inside configuration. they are on elevated stands and are braced also they sound very good but slightly more defined. can someone please explain what might be going on here? thanks
hotmailjbc
thanks for the comments and the article. i don,t a/b and choose to listen for a week or so.. the performance
with the spks "pointing" at the back wall is very nice to say the least. i,m keeping them set up this way for a while. i.ll report back......
Wouldn't the rear wave be the same as the front just the opposite phase? If that is correct you can essentially accomplish the same thing buy using the panels front facing with tweeters on the inside and wire them out of phase, positive speaker wire in negative terminal, etc. I have played with this in my set up and I did like the way it sounded, ultimately I left the tweeters on the inside but hooked the speaker wire up the correct way.
room is 12 x 18 and spks are 3 ft from rear wall and 4 ft from side walls.. no toe in at this time.
JBen on the Planar Asylum has measured the MMG's both ways and from the back the frequency response is tipped up between 10 and 15 kHz:

http://db.audioasylum.com/cgi/m.mpl?forum=mug&n=144728&highlight=MylarFront&r=

I'm guessing that's what you're hearing.