What Class D amps will drive a 2 ohm load

FYI. The Merrill 114 is a single chassis, stereo, power amplifier. It has been mentioned a few times here, stating the 114 amps are mono blocks. Talk about 5th grade reading levels...lol.....why can't discussions of audio stuff, hifi stuff and music listening stuff, be non confrontational ? Power cords, and fuses / fuse direction, have been the tops so far....

And still, no one commented, as likely, did not read, the two reviews I mentioned were worth reading, having to do with the Merrill 118s ), on page one of this thread.

     What I've learned lately on this thread is to avoid using speakers that present loads to the amp of less than 2 ohms.  I believe if speaker designers and manufacturers decide to rule out the use of the majority of amps working well with their speakers, then we can certainly decide to rule out the purchase and use of their speakers.  

    Flipping the proverbial bird at reasonable and responsible amp designers and manufacturers, as well as reasonable and responsible potential customers, should rightly have consequences, not be rewarded and not be considered a recipe for success in a high sound quality speaker product.

Tim 
     

why can't discussions of audio stuff, hifi stuff and music listening stuff, be non confrontational ?

really you have to ask this?? Because there's way too much BS and Voodoo in hi-end audio Mr D

Cheers George

What I’ve learned lately on this thread is to avoid using speakers that present loads to the amp of less than 2 ohms.

What can be the case, is these speakers can be the best measured/sounding ones, why drive them with amps that can’t do them justice.

As for flipping the bird to amp manufacturers, only when it’s warranted because of not saying how it is, or recommenders of them that have no idea what they’re on about.
Because they the manufacturers/recommenders would have "you" believe if an amp with 800w can drive a speaker that’s "inefficient" and with a "average impedance loading". Then that same amp can also drive a speakers that are "even more efficient" but with a "very hard impedance loading".