2. analog
  3. 150758-92835

Trans-Fi Terminator Tonearm: 2019 Update

In reading a few related posts on linear tracking tonearm, in general,  and Trans-Fi Terminator , in particular, I thought I would give a brief update of the Terminator.

I purchased the arm directly from Andrey in Moscow two months ago. From what I understand, Andrey has taken over production after Vic's retirement. What I received is the most up-to-date version of the arm with the carbon fibre wand and brass counterweights, the direct wire leads from cartridge to  phono amp, and a new brass manifold ( not evident from the main web-site). Both the wand and the new manifold are Andrey's contribution to the continued refinement of the Terminator.

Also,  please visit this site: https://darklanternforowen.wordpress.com/2017/04/15/terminator-tonearm-new-arm-mount/. This gentlemen from NZ has developed a new arm mount for the Terminator which advanced the arm's sonics even further. It was reading through the the development of this new arm mount that convinced me to order the Terminator after much prior research. I did not purchase the arm mount from NZ as it would not readily fit my Verdier La Platine, instead Andrey made a custom arm mount. It is in essence a two point support mount rather than a single point support rod that is commonly used. 

My previous arm was a SME V of 1990's vintage mounted with a ZYX airy. The Terminator is several notch above the SME V. All the accolades given to the Terminator seem justified. My main point in writing is that the new developments by Andrey, i.e. the carbon fibre wand and the newest brass manifold, seem to improve upon the Terminator even more ( see link above ). This is the news that I wanted to share with existing Terminator owners. I asked Andrey to start a blog on all the new stuff that is happening with the arm, but it seems that he is busy making 'things'!




ledoux1238
jtsnead's avatar
Ag insider logo xs@2x
jtsnead
217 posts
 
I was an early adopter of Vic's arm also loved the sound but ultimately got tired of messing with the pump etc., so I went back to pivoted and could not catch the sound I had before with multiple tables and arms. I got all the way up to the Triplanars top 10" arm and it was very close then I came across the Thales products and found a Simplicity II at a decent price and now I have the sound I remember albeit at more of cost vs the Terminator. Great news it is back in production.
ledoux1238 OP
276 posts
 
@jtsnead  The Thales’ are arms that I really like, pivot arms that can maintain tangentiality. FYI, Michael Fremer recently uploaded a video of his factory visit to Thales.  The fit and finish of the parts and the assembly process are more akin to watch making. 

A friend who is also considering the Terminator related his experience with the Thales ( not sure which model ). He was having compatibility problems btwn arm and cartridge, couldn’t stay tangential. We were musing if the EMT cartridges which Thales now produces  are a better fit. What cartridge are you using? No operational problems from your end then? My friend has since moved on to a Schroeder Reference which he is very happy with. And if you feel that a Terminator is comparable sonically  to a Thales Simplicity II, then not need for him to change to a Terminator.

For my part, the pump and surge tank as supplied are maintenance free so far.  I have read that different pumps affect sound quality. Although with a low pressure pump, I assume that was less an issue. What pump were you using back in the day?






jtsnead's avatar
Ag insider logo xs@2x
jtsnead
217 posts
 
@ledoux1238 the Simplicity arm likes heavier cartridges it did not like much Ortofon Cadenza Bronze so I got a Air Tight PC7 and it works very well with the arm, constant sound quality for the entire record. I can here how a pivoted arm affects the sound on different areas of a record.
I was using a good quality fish tank air pump I dont think that was the issue I feel the capalaries  might of needed to be cleaned but I never investigated it and just moved on
bdp24's avatar
bdp24
9,454 posts
 
My interest in the Terminator was piqued by the fact that designer/builder Vic showed on his website a London Reference cartridge mounted on the arm. Now THERE'S a fearless man, an outside-the-box thinker! 
ledoux1238 OP
276 posts
 
@bdp24 There aren’t many professional reviews of both the Terminator and Salvation TT. But the few that I have read seemed all to feature the Decca cartridge. Apparently when Michael Fremer reviewed the cartrigde, it was prone to mis-tracking and he recommended it highly...... as a back up cartridge! The truth may be that, as Vic demonstrated, It is a very good match with the Terminator, not fearless all.

Now that you have pointed this out, It has piqued my interest in matching the London Reference next with the Terminator!!

@slaw As a total aside, your mentioning the ET arm and Eminent Technology led me to something unexpected. In my other post, I had sought advice on electrostatic speakers. However, the planar LFT-8b may have been what I was looking for all along.
More to discover