My interest in the Terminator was piqued by the fact that designer/builder Vic showed on his website a London Reference cartridge mounted on the arm. Now THERE'S a fearless man, an outside-the-box thinker!
Trans-Fi Terminator Tonearm: 2019 Update
In reading a few related posts on linear tracking tonearm, in general, and Trans-Fi Terminator , in particular, I thought I would give a brief update of the Terminator.
I purchased the arm directly from Andrey in Moscow two months ago. From what I understand, Andrey has taken over production after Vic's retirement. What I received is the most up-to-date version of the arm with the carbon fibre wand and brass counterweights, the direct wire leads from cartridge to phono amp, and a new brass manifold ( not evident from the main web-site). Both the wand and the new manifold are Andrey's contribution to the continued refinement of the Terminator.
Also, please visit this site: https://darklanternforowen.wordpress.com/2017/04/15/terminator-tonearm-new-arm-mount/. This gentlemen from NZ has developed a new arm mount for the Terminator which advanced the arm's sonics even further. It was reading through the the development of this new arm mount that convinced me to order the Terminator after much prior research. I did not purchase the arm mount from NZ as it would not readily fit my Verdier La Platine, instead Andrey made a custom arm mount. It is in essence a two point support mount rather than a single point support rod that is commonly used.
My previous arm was a SME V of 1990's vintage mounted with a ZYX airy. The Terminator is several notch above the SME V. All the accolades given to the Terminator seem justified. My main point in writing is that the new developments by Andrey, i.e. the carbon fibre wand and the newest brass manifold, seem to improve upon the Terminator even more ( see link above ). This is the news that I wanted to share with existing Terminator owners. I asked Andrey to start a blog on all the new stuff that is happening with the arm, but it seems that he is busy making 'things'!
I purchased the arm directly from Andrey in Moscow two months ago. From what I understand, Andrey has taken over production after Vic's retirement. What I received is the most up-to-date version of the arm with the carbon fibre wand and brass counterweights, the direct wire leads from cartridge to phono amp, and a new brass manifold ( not evident from the main web-site). Both the wand and the new manifold are Andrey's contribution to the continued refinement of the Terminator.
Also, please visit this site: https://darklanternforowen.wordpress.com/2017/04/15/terminator-tonearm-new-arm-mount/. This gentlemen from NZ has developed a new arm mount for the Terminator which advanced the arm's sonics even further. It was reading through the the development of this new arm mount that convinced me to order the Terminator after much prior research. I did not purchase the arm mount from NZ as it would not readily fit my Verdier La Platine, instead Andrey made a custom arm mount. It is in essence a two point support mount rather than a single point support rod that is commonly used.
My previous arm was a SME V of 1990's vintage mounted with a ZYX airy. The Terminator is several notch above the SME V. All the accolades given to the Terminator seem justified. My main point in writing is that the new developments by Andrey, i.e. the carbon fibre wand and the newest brass manifold, seem to improve upon the Terminator even more ( see link above ). This is the news that I wanted to share with existing Terminator owners. I asked Andrey to start a blog on all the new stuff that is happening with the arm, but it seems that he is busy making 'things'!
- ...
- 199 posts total
@bdp24 There aren’t many professional reviews of both the Terminator and Salvation TT. But the few that I have read seemed all to feature the Decca cartridge. Apparently when Michael Fremer reviewed the cartrigde, it was prone to mis-tracking and he recommended it highly...... as a back up cartridge! The truth may be that, as Vic demonstrated, It is a very good match with the Terminator, not fearless all. Now that you have pointed this out, It has piqued my interest in matching the London Reference next with the Terminator!! @slaw As a total aside, your mentioning the ET arm and Eminent Technology led me to something unexpected. In my other post, I had sought advice on electrostatic speakers. However, the planar LFT-8b may have been what I was looking for all along. |
@bdp24 Found this post from 2010, dgarretson2,438 posts06-06-2010 1:05amIf you are open to something different you might contact Vic at Trans-Fi. He mentioned to me that the London Reference is his favorite cartridge on Terminator Pro. To eliminate hum problems with this cartridge he developed a screened 4N silver IC that runs uninterrupted from cartridge to phono stage. |
@ledoux1238 and @slaw, two more excellent reviews (both raves) of the ET LFT-8b are those in The Absolute Sound (by Robert E. Greene) and Hi-Fi World (Noel Keywood). VPI’s Harry Weisfeld has sung the speaker’s praises as well, saying it has the best midrange of any he has ever heard, regardless of price. I have been mentioning the loudspeaker here for a few years (I have a pair), that mention apparently falling on deaf ears. More than that, Harry’s statement has elicited outraged indignation from some. Very few seem to be interested in the speaker, though it is a ridiculous bargain. Not "trendy" enough for fickle audiophiles? ;-) Though the midrange drivers (an identical pair) are magnetic-planars similar in some respects to and inspired by Magnepan’s, they are unique (and patented) in a number of others. For one (an important one to me), there is no x/o in the passband of the LFT drivers---180Hz to 10kHz, with no x/o! A ribbon tweeter above that, an 8" sealed woofer below, with 1st order-filters. ET’s Bruce Thigpen is another outside-the-box thinker. Check out his TRW-17 Rotary Woofer---flat to 1Hz! A true "sub" woofer, designed for the bottom octave (20-40 Hz). And below!! |
- 199 posts total