I think that you first try to determine if all the tubes are getting tired or if just certain pairs or a single pair. My experience is the greatest benefit comes from replacing the smaller driver tubes in the amp. Determine which tubes most directly handle the incoming signal and these are most likely the most critical. Old stock 211s are almost impossible to find at a reasonable price so look for old stock with the other tubes in this amp. If you are using 6SN7s then you have many good old stock tubes to choose from and much is available online about the best in this family. If you buy a pair of the very best 6SN7s I think that you will experience a significant improvement over the stock current production tubes. It would be good to know what tubes this amp uses. Hope this helps.
Need help choosing replacement tubes for my 211 SET
I have a Voxativ 211 Integrated Amp. It came with Psvane tubes and they are beginning to wear out, or at least I believe they are since the highs are starting to sound poor. A few questions, do I replace all the tubes including the driver and input stages? Is that standard practice? Finally, what are some good recommendations on replacement tubes for the best sound? Budget is around $500 but can be stretched somewhat for something significantly better.
- ...
- 4 posts total
- 4 posts total