So many great golden era DD tables out there, what do you recommend for $1000?


Pretty much as the title says.
Have been looking for a while for a decent DD table to add to my lot.
Have bought a few lower end ones and ultimately been dissapointed.
Now I know there were/ are literally hundreds of choices from the Japanese Golden era of DD tables.
Looking for suggestions from actual owners of solid DD tables up to about $1000 .
I have read and read but nothing substitutes for real experience.
This would likely not be my primary table, my Garrard 401 has that position for now.

Thank you.
128x128uberwaltz
@uberwaltz : You are losting a rare opportunity to own the 60L that its specs are better than the DP-80 and with an additional very good advantage over it and this is that the 60L servo is bi-directional not even Technics units have. The TT is at a very good price.

I don’t need other TT but if I need it I already boughth it that 60L with my eyes " closed ", no quesrtion about.

What are you waiting for?. Yes is your decision, of course. I just thinking in " high voice ". That’s all.

R.
lol @rauliruegas

Many thanks sir, it is on my highly consideration list!
And I do thank you for the link!
My big concern on that particular listing is the seller and their very high negative feedback rate, 50 negative feedback in the last 12 months is totally unacceptable to myself, heck 1 is 1 too many!
My eBay feedback is 1702 with ZERO negative or neutral feedback.
Dear @uberwaltz :

https://www.ebay.com/itm/DENON-DP-60L-Direct-Drive-TURNTABLE-WORKING/153428377243?_trkparms=aid%3D333200%26algo%3DCOMP.MBE%26ao%3D1%26asc%3D59957%26meid%3D96c1c6ffbcb8455088b1cd60d6bdb8bc%26pid%3D100008%26rk%3D1%26rkt%3D12%26sd%3D383129488065%26itm%3D153428377243%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100008.m2219


Haha. As always, "best recommendations" from our Mexican member to buy from Japanese ebay seller who can’t even speak english and who has 13 negative feedbacks only last month and about 50 negative feedbacks over the year!

file:///C:/Users/Sylvia/Downloads/ve_denon_dp-60l_brochure_en_imp_scan.pdf

R.

This is the best link ever, directly to his hard drive "C"

C'mon Uber, don't wait, you have to buy immediately, it's approved by Raul. 

I don’t know where Raul got the information that the "specs" for the DP60L are better than those for the DP80. Perhaps he is even correct, but the DP80 was regarded by Denon as the top of their commercial line, bested only by the DP100 and DP308, which were more intended for professional and studio use. The second most desirable of the commercial line, or maybe a model of equal performance, is the DP75, with the DP60 behind those two. (Raul used to tell me that the DP75 is also superior to the DP80. I’ve seen no data to justify that statement.) There were no universal standards for how to measure turntable specs back in those days, and it would depend upon how Denon made the measurements and in what year, since there were some changes in how to measure S/N, etc, after 1979. Turntables marketed after 1979 will seem to have better specs because of changes in the method for measurement. This does not mean that I think little of the DP60. It would be a fine choice, too.

I think Best groove et al are correct; the SP10 Mk2 did not have the MN6042 chip. I stand corrected on that.
Best groove, Do you know what is special about "bi-directional servo"?  I think it's 90% marketing.  But the TT101, which also has bi-directional servo control, is a great turntable.  I'd put the TT81 on par with maybe the Denon DP60. TT71 is not in the ballpark.  These model differences did mean something, after all.