Also JVC TT81 or QL8 have bi-diretional servo.
This was discussed quite some time ago and any references
to this statement are incorrect.
Owner of a TT-101.
So many great golden era DD tables out there, what do you recommend for $1000?
Pretty much as the title says.
Have been looking for a while for a decent DD table to add to my lot.
Have bought a few lower end ones and ultimately been dissapointed.
Now I know there were/ are literally hundreds of choices from the Japanese Golden era of DD tables.
Looking for suggestions from actual owners of solid DD tables up to about $1000 .
I have read and read but nothing substitutes for real experience.
This would likely not be my primary table, my Garrard 401 has that position for now.
Thank you.
Have been looking for a while for a decent DD table to add to my lot.
Have bought a few lower end ones and ultimately been dissapointed.
Now I know there were/ are literally hundreds of choices from the Japanese Golden era of DD tables.
Looking for suggestions from actual owners of solid DD tables up to about $1000 .
I have read and read but nothing substitutes for real experience.
This would likely not be my primary table, my Garrard 401 has that position for now.
Thank you.
- ...
- 279 posts total
This is likely a better option for a dp60. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283627558925 From what scant info I can find on the net it would seem that although the plinth looks substantial it really is not. A little flimsy with a nice Rosewood veneer. A fair bit of bracing and additional mass should work wonders. Apparently the earlier models like the dp50 had Much more meaty plinth. |
@lewm lewn with $ 1000 you do not buy a TT101 nor a QL 10 for this I recommended a complete QL 8 or just the engine of a TT81 .. it’s just a matter of budget. @totem395 sorry then I was wrong ... I read a lot in this forum too and probably got drunk with exact and contrary readings. Owner of a TT71 TT101 and TT801 yup :) |
- 279 posts total