2. amps-preamps
  3. 151362-10297

Opinions Golden Sounds DH Cones, I just bought some,they came in today

I bought some Jumbos to go under Preamp. Will try them this weekend, they just came in today. My tube CD player has easy access so I replaced Mapleshade brass with jumbos. I placed them in biggest triangle possible and found them a little exaggerated in the highs. I moved the back two feet 2 or so inches closer together and it smoothed out very nicely. That's as far as I've gotten. Very nice improvement over brass which I swapped back in just to confirm my findings.  If you have used the DH cones which component faired the best with the cones? I have amp, Preamp, phono preamp, turntable power supply,. I've heard 2 up 1 down, 2 down 1 up. Any advise were to place under component. I am going to buy Gaia Oreos next anyone compared the two, thank you.

paulcreed
lowrider57's avatar
lowrider57
5,400 posts
 
@geoffkait , I'm using the Supers under my tube amp and the improvement in all areas of SQ over the Jumbo is significant.

geoffkait's avatar
geoffkait
23,365 posts
 
I stand corrected. 😛 I once had fifty count em! Supers in my system. No that’s not a typo.
boxer12
8,655 posts
 
Paul,
In regard to your question... I've found the DH cones to sound better under my transport than the pucks. The pucks really "deadened" the sound of the transport where the cones (points down) made it sound much more alive. The speakers I use are large stand mount Wilsons. The pucks are wonderful between the stand & speakers where the cones are sound better between the floor & the stands. Pucks or springs are under everything else except the Acoustic Revives power distribution devices which sound better (for whatever reason) with cones than the pucks. I would say in general, the cones are brighter sounding (not over the top though) than springs or pucks. 
paulcreed OP
541 posts
 
I find that interesting, that is why I left cones under CD player it is very clear and lively with out being bright in the slightest since I adjusted cone placement. Very enjoyable to listen to and don't want to remove them. Pucks will be in Friday and will see what they can do. I see people mentioning springs, I've never used springs where do you buy and place your springs? Directly under component or platform or both? How do you determine stiffness of springs.
geoffkait's avatar
geoffkait
23,365 posts
 
An interesting experiment for those with lots of cones lying around. Construct a double layer wood stand for the component, using two maple boards or Baltic birch ply. Separate the two wood layer with cones, then place cones under the bottom wood layer and cones under the component. You can use three cones for each layer for total of nine cones. This two-stage setup will sound superior to the case of one set of cones under the component.
More to discover