I need some turntable guidance

Then there is ego. Which is often on display here.

Can't argue with that......

Dear @webfan : Here a good opportunity for the Lyra Etna:

https://www.audiogon.com/listings/lis9h1a8-lyra-etna-cartridges


R.

Well you have lots of choices

I run tubes (Leben pre & cj 12 monoblocks) into ML Summits.  Front end analog is SOTA Cosmos (in now for series VI upgrade).  

Other setup is a fisher 500C with modified LaScala's.  front end is JVC QLY5F.

Both tables have been fun and reliable.  Previously owned Garrard and Thorens 125 and 126 tables.

The JVC is easy to operate and a fine performer.  The SOTA is more refined and has a better overall presentation but I also am using moving coils with the SOTA and moving magnet with the JVC.  A cartridge has a really pronounced influence on sound.

The SOTA Cosmos I bought used after being floored how good a Sapphire performed in my system close to a couple of decades ago.  I brought it up to series IV spec a number of years ago (RIP - Kirk).  It was and is a wonderful deck.  Vinyl with full bodied sound and approaches the background silence of my digital rig.  I sent it in after discussing the speed control and mag platter with Donna.

I did not feel the need to HAVE to upgrade as the SOTA IV was to my ears already a fantastic performer but you know, audio is a hobby and I already know I will never sell it and figured why not.  Donna swears the mag platter is a blow away type of upgrade but I like that the folks who sell the tables have upgrade plans and stand behind their products.

SOTA makes a GREAT deck.

Just for the sake of comparison;  I had for many years what was a very good middle of the road direct drive which I purchased back in college.  It was the Marantz 6300 and I had been using (still am) the Audio Technica AT15ss/20ss cartridge.  To me it was nirvana.   However in the past several years I have been doing a lot of upgrading and based on what some very well respected guys in the audio business had been suggesting, I found a mint used VPI Ares3 which was about 9 years old and it didn't have a tone arm with it; but it did come with the very expensive and rare 25 pound super platter.  I was also told that if I were to find either the SME Series IV or V tone arm, I'd keep it for life.  I did in fact locate a mint used Series IV and I machined the arm board to accept the new tone arm.  I also modified a set of SVS isofeet medium durometer rubber speaker feet to mount to the VPI for vibration isolation.   The AT20ss was transferred out of the vintage Marantz and over to this new set up.   

I was expecting some improvement obviously, but what I heard immediately nearly floored me!  I was hearing details in the known well to me music that I had never heard before.  Plus the signal was so much quieter and there was virtually NO audible low end feedback from the bass frequencies at any very loud level.  I was blown away.  

That put me onto the next phase which was to try out several different phono stages and that proved to be another eye opener to me.  With each new upper level phono stage I put into service, there was something new in the detail to hear.   I just in fact received a custom built Whest PS.30 RDT SE 2019 from London about a month ago which was tailored to my AT20ss... it's just unbelievable how much detail is buried deep in the vinyl that one would never other wise hear.

So do not discount seeking out a nice used upper end turntable.  I think my Ares3/super platter/Series IV was around $9K retail and I have about $3300 into it not including my time to do some machine work and set up.  Recently I designed a micrometer head clamping system which will attach to the SME Series IV main shaft and it's being made on a CNC machine shortly and going out for some nice hard anodizing.  That will allow me to do on the fly VTA precision adjustments.  I really have no idea what this will gain me, but it will be fun to try it out, not to mention it looks really cool with the fine .001 thousandths inch scale on it.  And I can easily find my original starting point from where I like to set the VTA.

check out the Mcintosh turntables, the entry level is around $5000. the mid road. $7500. their best $10500..............im a cd man and streamer for free,  albums are too much maintenance with washing discs , storage, etc...... but they are romantic and kool, I'm getting to old to keep jumping up and flipping it over......poor me