I have a pair of Aragon 1Ks and one night I turned them on to hear a loud humming buzz comming from both units. I have a pair of dedicated 20 amp power lines running from the main household fusebox (one to each amp) so nothing else is on those circuits. Then I remembered my home theatre subwoofer making a similar humm/buzz when the halogen lamp in that room was set to half power - on the same cicuit as the subwoofer. So today I went across the house into the home theatre area and sure enough that same halogen light was turned on at half power, so I turned it off and the humm/buzz in my amplifiers dissappeared. Hence, even though it was across the house on a different circuit that light was still feeding DC voltage back through the main fusebox and into the dedicated lines going to my amplifiers. Hope this post helps others.
Getting Rid of Transformer Hum
I just picked up a Proceed AMP5 the other day. Upon hooking it up to a power cord, I noticed an annoying pulsating hum that sounds like a lightsaber match in Star Wars. This hum is coming straight from the amp, not the speakers, so it's not ground loop. There is nothing hooked up to the amp besides the power cable. What's interesting is that the amp is even though there is a standby mode, the amp was definitely turned off!
I noticed, though, that the hum got louder as the voltage from my wall dropped below 115-ish. Lowest it got to was 109 when everything was turned on, including a halogen lamp. Well, I turned off the lamp and all the lights in the house, and unplugged them -- helped the voltage drop but didn't eliminate the hum.
Am I completely lost on this amp? Or is there a way to take care of this problem without investing thousands more on some power regenerator? Another poster mentioned a similar problem solved by tightening a "chassis ground screw", but I have no idea what/where that is.
Help!
I noticed, though, that the hum got louder as the voltage from my wall dropped below 115-ish. Lowest it got to was 109 when everything was turned on, including a halogen lamp. Well, I turned off the lamp and all the lights in the house, and unplugged them -- helped the voltage drop but didn't eliminate the hum.
Am I completely lost on this amp? Or is there a way to take care of this problem without investing thousands more on some power regenerator? Another poster mentioned a similar problem solved by tightening a "chassis ground screw", but I have no idea what/where that is.
Help!
- ...
- 21 posts total
Magnetostriction. It’s usually another item in the home that will cause amp hum (not heard through the speakers) Most common items are: LED lights, Fan Speed controls, Some lamp dimmers, proportional temp controls on old range tops, coil heaters with thermostat fans, etc. None should be leaking DC back into the mains but they often do. |
I appreciate your response. A new halogen desk light set at 1/2 on a different circuit solved my AMP5 Hum eight years later. I also noticed an annoying pulsating hum that reminds me of a lightsaber match from Star Wars once it was connected to a power source. |
- 21 posts total