Center placed equipment stands


Will I ever learn?  Just cut down the height of my Quadraspire Reference X equipment stand placed between the floor standers and again experienced better imaging.  Each time I do this it improves the imaging and overall sound.  Hope this helps others.
celtic66
Yyzsantabarbara 

get a heavy set of floor to ceiling drapes . Fabric stores have millions of options for cheap. Slide your desk closer to the windows. Put your stereo rig in the closet. Place your speakers on either side of your work station. Just above the monitors. Set the two tall pads in the corner opposite  the windows. Keep the one between the door and closet . Place the other four on the wall behind your new seating position. Now you can at least continue programming while listening to tunes. Make the whole room a station. As opposed to a dual purpose set up. And i would probably lose those cubes and get a set of jbl 306p monitors. And some sort of dac. (Aune x1 perhaps ) sell the peach tree . 
@davekayc Thanks for the time to write up that suggestion.  Your suggestion was something I never contemplated. I will have to let it percolate in the brain. Do you have any opinion of a bookshelf with books as a sound absorber in-between the speakers?

One thing that I am benefiting from today with this configuration is the ability to have my room door open, it makes my room sound bigger.  My room today sounds really good with the KEF LS50's but I want to get better gear in there.

The gear I have in this room will leave very soon and the incoming gear will likely be the much bigger Yamaha NS5000 "bookshelf" + Lyngdorf 3400 (with Room Perfect) + Luxman m900u amp. I will only use the preamp section of the Lyngdorf integrated. I am also considering the Anthem STR preamp with ARC3. So DSP is going to be part of this new system. I was considering putting the electronics, except the amp inside the closet.

This system will hopefully be my second system, with a bigger room available in a year or 2 for the placement of a non-DSP based system or I may even move this Yamaha based system to the future bigger room and ditch the DSP. 
yyzsantabarbara...

Try a ten-pack of SR’s HFT's placed around the room as directed. I think you will be pleased with the results.

Frank
My rack has been behind and off to the side of my speakers since I can remember......

Had a few different configurations with a large power amp on the floor and longer balanced ic.
But for last year or more have had an integrated at bottom of the rack and running 14ft speaker cables and loving every minute of it!