2. speakers
  3. 152724-68463

3D imaging

I I started thinking about this yesterday. What makes speakers produce a 3D image? I figured the first thing is the recording itself. I'm guessing mic placement has a lot to do with this. Next I would imagine is room,and speaker placement. Downstream gear certainly has to have some effect on this. Does the crossover have something to do with providing this "illusion " for lack of a better term? 
     Now please understand,I don't have anywhere near the technical knowledge a lot of you folks have,so as you explain this phenomenon,please dumb it down for me! 
    Thanks in advance,
        Ray
128x128rocray
geoffkait's avatar
geoffkait
23,365 posts
 
With respect to the Chartwells my guess is that you will get a better soundstage by moving the speakers closer together, making them 5 feet apart, even less perhaps, with no toe-in. Most speakers are set too far apart. 
rocray's avatar
rocray OP
1,448 posts
 
I do have these with no toe in,so let's give it a whirl moving them closer together. I'll report back with my results.
roberjerman
4,319 posts
 
@tomic601 : Transient Intermodulation Distortion - applies only to amplifier distortion!
rocray's avatar
rocray OP
1,448 posts
 
Ok geoffkait, I moved them a foot closer,and to my ears the soundstage became pinched and limited to only between the speakers. I then moved them back out in 1" incriminates. They are now about 6" closer,and the soundstage has opened back up.
rocray's avatar
rocray OP
1,448 posts
 
millercarbon,do you use HFT's with traditional acoustic treatments,or are these applied alone?
More to discover