Mark Levinson no 37 transport screw

I went ahead and purchased one from ML authorized repair shop in Los Angeles - George Meyer. Cost around $75 for a screw - crazy!

Cost around $75 for a screw - crazy

True, but also thinking it could may have a specially machined head to recess into the chassis when done up. 

Cheers George

There is no way on he!! that one screw can cost $75 if ML would charge that then that's a company that I'd never buy from...just sayin

Took a 390s on trade and it didn’t have the transport screw. No response from ML so I started trying different thread sizes. It’s a 10/32. Purchased a 10/32 x 2" machine screw from Ace ($.19) and ended up cutting it to 1 1/2" and tapering the tip with a file so it catches the transport threads. Opened up the unit just to be sure and the transport was solid. Hope this helps someone else looking in the future. 

NOTE: This may not be the same for the # 37