Audio Kinesis Swarm Subwoofer Awarded 2019 Golden Ear Award by Robert E. Greene

I use 2 subs and although I think the Swarm is a great idea, I have frightening dreams about being attacked by a swarm of woofers...otherwise yeh, I get it.

That being said, there are work-arounds if the need arises to cross over higher up

@audiokinesis no no no, with your midbass driver I think the 80 hz works wonderful, actually I run mine 60 below, don't you dare touch my crossover Duke, sounds perfect the way it is

I have frightening dreams about being attacked by a swarm of woofers...otherwise yeh, I get it.

My Swarm is trained not to attack, you have 2 subs? That's heresy :) with your perfect speakers

Luisma31 wrote: "...no no no, with your midbass driver I think the 80 hz works wonderful, actually I run mine 60 below, don’t you dare touch my crossover Duke, sounds perfect the way it is." 

Thank you Luis! 

I was referring to the hypothetical situation where an 80 Hz crossover was not high enough.

One time we were integrating a Swarm with a system that was horn loaded down to 80 Hz, but it turned out that the response started rolling off at about 150 Hz and then the rolloff accelerated below 80 Hz. So we placed two Swarm units near the main speakers and drove them with one amplifier and rolled them off at about 140 Hz, and then the other two were placed much further from the main speakers and were rolled off around 60 Hz. We used the parametric EQ’s to fine-tune the blending.

Something like that would be the work-around if the crossover needed to be higher than 80 Hz. 

Duke

I understand very interesting, just the subs closer to the speakers at 140 (because the listener been able to pinpoint their location) and the other 2 at 80 to make it sound more natural, very cleverI guess speakers that are weak between 80 and 140 are not very common or is it?