BEST HARMLESS/SIGNATURELESS SPEAKERS CAPACITORS.

Dear @paulcreed : Here what you can buy at Mouser:

https://www.mouser.com/WIMA/Passive-Components/Capacitors/Film-Capacitors/MKP-10-Series/_/N-9x371?P=1z0zldhZ1yofbfeZ1z0wqtr

that are 1.5uf 1000vdc (600vac. ) 10% tolerance ( does it not matters for a test. )

https://www.mouser.com/WIMA/Passive-Components/Capacitors/Film-Capacitors/MKP-10-Series/_/N-9x371?P=1yofbfeZ1z0zldhZ1z0wrjc

that are the 4.7uf in stock, no problem.

and the 8.2uf you can have it with a 4.7uf plus a 3.3uf in parallel, solved:

https://www.mouser.com/WIMA/Passive-Components/Capacitors/Film-Capacitors/MKP-10-Series/_/N-9x371?P=1yofbfeZ1z0zldhZ1z0wquy


R.

Dear friends: I finish my tests evaluations with the Wima caps in my tweeters and band-pass speakers crossovers.

I said finish because I received from Mouser the precise wima caps values I need for, so I’m not listen any more to parallel/series caps but single cap on each position.

I have to say that today Wima is the best harmless and signatureless cap I experienced first hand in my system These Wima caps are dead neutral/colorless and does not adds any " artefacts " I can be aware off and does not needs weeks or months to settle down only a few hours from new.

Between today and tomorrow I will try to change the the caps in the mid range crossovers: 16.8uf and will see what happens down there.

Btw, with the tweeters Wima caps happened something that in the past happened too when I added the super-tweeters in my system : the most notorious listened improvement with the ST was a better bass range and soundstage definition.

R.

Dear @cal3713 @paulcreed : Had you time to make the wima cap tests in your speakers? if yes the: which were/are your experiences about?

Thank’s in advance.

Happy Holidays for every one,
R.

Have not yet, but will next time I'm making a mouser order... Looking forward to hearing them. 

Dear @cal3713 : Yes, do it could be interesting for you.

R.